Save up to 70% on ALL Clearance Items

Swarovski Let It Bead Digital Book

Enjoy this digital beading book from Swarovski featuring a variety of fun categories of inspiration. This jewelry can be worn from day to night (casual to glam) and adds that extra touch of sparkle. You'll find plenty of different ideas to try with free instructions and a supplies list for each.

You can get a free PDF version that includes all of the designs below and more here: Download PDF

By The Beautiful Sea

“By the sea, by the beautiful sea!”
Beautiful, mystical & sparkling, just like crystals from Swarovski® & TierraCast® charms! Incorporate or substitute your favorite seaside colors to create your own one-of-a-kind custom design. Some of our favorites are, Aquamarine, Indicolite, Lt. Turquoise, Lt. Azore, Pacific Opal, White Opal, Crystal Dark Lapis Pearl and Crystal Iridescent Light Blue Pearl & Crystal Iridescent Dark Blue Pearl.

By The Sea Bracelet

By The Sea Bracelet

Swarovski Crystals:
22    Swarovski 5000 4mm Faceted Round Majestic Blue
11    Swarovski 5000 8mm Faceted Round Majestic Blue
30    Swarovski 5328 6mm Bicone Light Sapphire Shimmer
22    Swarovski 5810 4mm Round Crystal Pearlescent White Pearl
32    Swarovski 5810 6mm Round Crystal Pearlescent White Pearl
11    Swarovski 5810 8mm Round Crystal Pearlescent White Pearl

Other Supplies:
1    TierraCast Antique Silver Abalone Charm
1    TierraCast Antique Silver Starfish Charm
1    TierraCast Antique Silver-Plated Pewter Shell Charm
1    TierraCast Antique Silver-Plated Pewter Sand Dollar Charm
4    6mm Oval Silver Jump Rings
5 Coils    Beadalon Memory Wire Silver Bracelet
1    Beadalon Memory Wire Finishing Pliers

Instructions:

  1. Taking one end of the memory wire, make a full turn with pliers to make a closed ring.
  2. Using all the beads and pearls, slide them on to create a desired pattern. Trim the memory wire to 1“ and make a full turn with pliers to make a closed ring.
  3. Using one small jump ring for each charm, attach the sealife charms to each end of the bracelet.

By The Sea Earrings

By The Sea Earrings

Swarovski Crystals:
2    Swarovski 5000 4mm Faceted Round Majestic Blue
2    Swarovski 5000 8mm Faceted Round Majestic Blue
2    Swarovski 5810 6mm Round Crystal Pearlescent White Pearl
2    Swarovski 5810 10mm Round Crystal Pearlescent White Pearl

Other Supplies:
1    TierraCast Antique Silver Large Spindle Shell Charm
1    TierraCast Antique Silver Starfish Charm
1    Sterling Silver Plain Earwire with Ball (Pair)
8”    20-Gauge Silver Tarnish-Resistant Artistic Wire

Instructions:

  1. Cut Artistic wire into eight 1” pieces and set aside.
  2. Using one piece of wire make a simple loop at one end, slide on one bead, and make a simple loop at the other end to close. Repeat 7 more times for all the beads and pearls.
  3. Starting at the bottom, attach one of the sealife charms to the 4mm Majestic Blue component, attach that to the 6mm pearl component, attach that to the 8mm Majestic Blue component, attach that to the 10mm pearl component and finish with attaching the ear wire. Repeat to make second earring.

Mother Nature

Swarovski® crystals & crystal pearls together with TierraCast® charms portray the caring and creative side of Mother Nature! Use Purple Velvet, Scarlet, Fern Green, Crystal Metallic Sunshine or an endless combination of Swarovski® crystals & crystal pearls to customize these designs and create your own force of nature!

Purple Skies in Tuscany

Purple Skies in Tuscany

Swarovski Crystals:
12    Swarovski 5040 8mm Briolette Bead Tanzanite
12    Swarovski 5810 4mm Round Crystal Pearl Iridescent Purple
8    Swarovski 5810 8mm Round Crystal Pearl Iridescent Purple

Other Supplies:
5    TierraCast Antique Copper Sunflower Charm
1    9x5mm Antique Copper-Plated Trigger Clasp
1    6mm Antique Copper-Plated Closed Jump Ring
5    TierraCast Copper Small Oval Open Jump Ring
2    TierraCast Antique Copper 2 x 2mm Crimp
2    3mm Antique Copper Crimp Cover
10”    Beadalon 49 .018 10-Foot - Silver-Plated

Instructions:

  1. Attach one small oval jump ring to each of the five Sunflower charms and set aside.
  2. Using wire slide on one crimp bead and crimp to lobster clasp. Add crimp cover. Slide on beads and sunflower charms to create desired pattern and then add crimp bead and 6mm jump ring and crimp to close. Add crimp cover.

Ivy Green

Ivy Green Bracelet

Swarovski Crystals:
24    Swarovski 5000 4mm Faceted Round Yellow Opal
12    Swarovski 5810 6mm Round Crystal Pearl Iridescent Green

Other Supplies:
11    TierraCast Antique Gold Ivy Leaf Charm (try these as alternates)
1    Beadalon Gold-Plated Medium Lobster Clasp
1    TierraCast Gold-Plated Brass Large Oval Open Jump Ring
11    TierraCast Gold-Plated Brass Small Oval Open Jump Ring
2    14K/20 Gold-Filled 2 x 2mm Crimp Tube
2    3mm Gold-Filled Crimp Cover
10”    Beadalon 49 .018 10-Foot - Silver-Plated

Instructions:

  1. Attach one small oval jump ring to each of the eleven Ivy Leaf charms and set aside.
  2. Using wire slide on one crimp bead and crimp to lobster clasp. Add crimp cover. Slide on beads and ivy leaf charms to create desired pattern and then add crimp bead and 6mm jump ring and crimp to close. Add crimp cover.

Pretty in Pink Jasmine

Pretty in Pink Jasmine Bracelet

Swarovski Crystals:
12    Swarovski 5040 6mm Briolette Bead Light Rose
6    Swarovski 5000 8mm Faceted Round Indian Pink
12    Swarovski 5810 4mm Round Crystal Pearlescent White Pearl

Other Supplies:
5    TierraCast Antique Silver Star Jasmine Charm
1    Beadalon Silver-Plated Medium Lobster Clasp
1    TierraCast Silver-Plated Brass Large Oval Open Jump Ring
5    TierraCast Silver-Plated Brass Small Oval Open Jump Ring
2    Sterling Silver 2 x 2mm Crimp Tube Bead
2    Sterling Silver 3mm Crimp Cover
10”    Beadalon 49 .018 10-Foot - Silver-Plated

Instructions:

  1. Attach one small oval jump ring to each of the five Star Jasmine charms and set aside.
  2. Using wire slide on one crimp bead and crimp to lobster clasp. Add crimp cover. Slide on beads and star jasmine charms to create desired pattern and then add crimp bead and 6mm jump ring and crimp to close. Add crimp cover.

Symbolic Spiritualism

Cultivate your spirituality with these jewelry designs created with crystals from Swarovski® and TierraCast® Spiritual Symbols. Choose from a wide variety of symbols and crystal colors to create designs that are most meaningful to you. Great for gift-giving and group projects!

Marrakesh Miracle Necklace

Marrakesh Miracle Necklace

Swarovski Crystals:
30    Swarovski 5000 4mm Faceted Round Light Colorado Topaz Shimmer (try this alternate)
2    Swarovski 5000 6mm Faceted Round Light Colorado Topaz Shimmer (try this alternate)
14    Swarovski 5000 8mm Faceted Round Light Colorado Topaz Shimmer (try this alternate)
28    Swarovski 5000 4mm Faceted Round Erinite Shimmer (try this alternate)
2    Swarovski 5000 6mm Faceted Round Erinite Shimmer (try this alternate)
12    Swarovski 5000 8mm Faceted Round Erinite Shimmer (try this alternate)
13    Swarovski 5328 6mm XILION Bicone Light Turquoise
15    Swarovski 5328 8mm XILION Bicone Light Turquoise

Other Supplies:
1    TierraCast Antique Gold-Plated Pewter Hamsa Hand Link
2    TierraCast Antique Gold-Plated Pewter Marrakesh Link
1    TierraCast Antique Gold-Plated Pewter Temple Clasp Set
6    TierraCast Antique Gold Ethnic Barrel
7    2-inch Satin Hamilton Gold-Plated 20 Gauge Head Pin
6”    Artbeads Designer Wire - Gold Non-Tarnish 20 Gauge (21 ft. spool)
30”    Beadalon 49 .018 10FT - Gold-Plated
4    14K/20 Gold-Filled 2 x 2mm Crimp Tube
4    3mm Gold-Filled Crimp Cover

Instructions:

  1. Cut 20 gauge wire into three 2” pieces and set aside.
  2. Using one piece of wire make a simple loop, slide on one 5000 8mm Lt Col Topaz Shimmer bead and make a simple loop to close. Repeat once. Using the two Marrakesh links, link them together with the two beaded links (following the photo). And set aside.
  3. Using one piece of wire make a simple loop, slide on one 5000 6mm Erinite Shimmer bead, one 5328 8mm Light Turquoise bead, and one 5000 6mm Erinite Shimmer, and make a simple loop to close. Using this link connect together the top of the Hamsa Hand link to the center hole in one side of the Marrakesh link made in Step 2.
  4. Using one head pin slide on one 5000 4mm Lt Col Topaz Shimmer bead, one 5328 6mm Light Turquoise bead, and one 5000 4mm Lt Col Topaz Shimmer bead and make a simple loop. Repeat 2 more times. Taking these three components add them to the 1st, 3rd, and 5th holes in the bottom of the Hamsa Hand.
  5. Using one head pin slide on one 5000 4mm Erinite Shimmer bead, one 5328 6mm Light Turquoise bead, and one 5000 4mm Erinite Shimmer bead and make a simple loop. Repeat 1 more time. Taking these two components add them to the 2nd and 4th holes in the bottom of the Hamsa Hand.
  6. Using one head pin slide on one 5328 6mm Light Turquoise bead, and one 5000 6mm Lt Col Topaz Shimmer bead and make a simple loop. Repeat 1 more time. Taking these two components add them to the 2nd and 4th holes bottom of the Marrakesh link connecting to the Hamsa Hand.
  7. Cut the beading wire into two 15” pieces. Using one piece of wire, slide on one crimp bead and crimp to the top 1st hole on the Marrakesh link. Add crimp covers. Create a pattern using half of the beads, slide them on to create a desired pattern. Then slide on one crimp bead and crimp to one end of the Temple Clasp. Add crimp cover. Repeat the pattern for the other side of the necklace.

Marrakesh Miracle Earrings

Marrakesh Miracle Earrings

Swarovski Crystals:
12    Swarovski 5000 4mm Faceted Round Light Colorado Topaz Shimmer (try this alternate)
10    Swarovski 5000 4mm Faceted Round Erinite Shimmer (try this alternate)
10    Swarovski 5328 6mm XILION Bicone Light Turquoise

Other Supplies:
2    TierraCast Antique Gold-Plated Pewter Hamsa Hand Link
1    TierraCast 14K/20 Gold-Filled Earwire with Short Blank (Pair)
10    2-inch Satin Hamilton Gold-Plated 20 Gauge Head Pin

Instructions:

  1. Using one head pin slide on one 5000 4mm Lt Col Topaz Shimmer bead, one 5328 6mm Light Turquoise bead, and one 5000 4mm Lt Col Topaz Shimmer bead and make a simple loop. Repeat 2 more times. Taking these three components add them to the 1st, 3rd, and 5th holes in the bottom of the Hamsa Hand.
  2. Using one head pin slide on one 5000 4mm Erinite Shimmer bead, one 5328 6mm Light Turquoise bead, and one 5000 4mm Erinite Shimmer bead and make a simple loop. Repeat 1 more time. Taking these two components add them to the 2nd and 4th holes in the bottom of the Hamsa Hand.
  3. Using one earwire, slide on one 5000 4mm Erinite Shimmer bead and make a simple loop. Attach to the top hole in the Hamsa Hand link.
  4. Repeat Steps 1 – 3 to make second earring.

I Have My Eye on You

I Have My Eye On You Bracelet

Swarovski Crystals:
6    Swarovski 5000 6mm Faceted Round Light Sapphire Shimmer (try this alternate)
10    Swarovski 5000 8mm Faceted Round Majestic Blue
8    Swarovski 5328 4mm Bicone Light Sapphire Shimmer
1    Swarovski 4775 18 x 10.5mm Eye Fancy Stone Crystal CAL V Blue
1    Swarovski Rhodium-Plated Link Setting for 4775 18mm Eye Fancy Stone

Other Supplies:
1    TierraCast Antique Silver-Plated Pewter Evil Eye Charm
1    Beadalon Silver-Plated Medium Lobster Clasp
1    TierraCast Silver-Plated Brass Small Oval Open Jump Ring
4    Sterling Silver 2 x 2mm Crimp Tube Bead
4    Sterling Silver 3mm Crimp Cover
12”    Beadalon 49 .018 10-Foot - Silver-Plated
1    Swarovski Crystal Two-Part Epoxy Glue
Alcohol wipes

Instructions:

  1. Using the alcohol wipes to clean the finding and let sit to air dry.
  2. Mix small amount of two-part epoxy and glue in the evil eye fancy stone and set aside to dry for 24 hours.
  3. Cut beading wire into two 6” pieces.
  4. Using wire slide on one crimp bead and crimp to one end of the finding created in Step 2. Add crimp cover. Slide on beads to create desired pattern and then add crimp bead and lobster clasp and crimp to close. Add crimp cover. Repeat for other side and crimp to close with the oval jump ring.
  5. Add on evil eye charm to oval jump ring.

Namaste at Night

Namaste at Night Bracelet

Swarovski Crystals: 
16    Swarovski 5000 6mm Faceted Round Jet
11    Swarovski 5000 8mm Faceted Round Jet
16    Swarovski 5328 6mm XILION Bicone Jet
22    Swarovski 5040 6mm Briolette Bead Jet
50    Swarovski 5328 4mm XILION Bicone Crystal Silver Night
21    Swarovski 5040 6mm Briolette Bead Crystal Silver Night
16    Swarovski 5040 8mm Briolette Bead Crystal Silver Night
1    Swarovski 2205 14mm Flame Flatback Crystal

Other Supplies:
1    TierraCast Rhodium-Plated Pewter Flame Frame Charm
1    TierraCast Antique Silver-Plated Pewter Round OM Charm
1    TierraCast Antique Silver-Plated Pewter Round Buddha Charm
1    TierraCast Antique Silver-Plated Pewter Round Lotus Charm
4    TierraCast Silver-Plated Brass Medium Oval Open Jump Ring
5 Coils    Beadalon Memory Wire Silver Bracelet 1oz
1    Swarovski Crystal Two-Part Epoxy Glue
Alcohol wipes

Instructions:

  1. Using the alcohol wipes clean the Flame Charm and let sit to air dry.
  2. Mix small amount of two-part epoxy and glue in the 14mm 2205 Flame Flatback stone and set aside to dry for 24 hours.
  3. Taking one end of the memory wire and make a full turn with pliers to make a closed ring.
  4. Using all the beads, slide them on to create a desired pattern. Trim the memory wire to 1” and make a full turn with pliers to make a closed ring.
  5. Using one small jump ring attach the charms to each end of the bracelet.

Temple Bib of Beauty

Temple Bib of Beauty Necklace


Swarovski Crystals: 
65    Swarovski 5328 4mm XILION Bicone Fuchsia
13    Swarovski 5000 8mm Faceted Round Fuchsia
26    Swarovski 5328 6mm XILION Bicone Amethyst
39    Swarovski 5810 6mm Round Crystal Pearl Iridescent Purple

Other Supplies:
1    TierraCast Antique Silver-Plated Pewter Temple Clasp Set
18”    4mm Silver-Plated Rolo Chain By the Foot
13    Sterling Silver 2 inch Ball-end Head Pin, 24 gauge
13”    20-Gauge Silver Tarnish-Resistant Artistic Wire, 6-Yard Spool
2    TierraCast Silver-Plated Brass Small Oval Open Jump Ring
26    Sterling Silver 2 x 2mm Crimp Tube Bead
26    3mm Silver-Plated Crimp Cover
52” Beadalon 49 .018 10-Foot - Silver-Plated

Instructions:

  1. Using one ball pin slide on one 5000 8mm Fuchsia bead and make a simple loop. Repeat 12 more times and set aside.
  2. Cut 20 gauge wire into thirteen 1” pieces. Using one piece, make a simple loop at one end, slide on one 5328 4mm Fuchsia bead and make a simple loop to close. Repeat 12 more times and set aside.
  3. Cut beading wire into thirteen 4” pieces. Using one piece of wire slide on one crimp bead and one beaded link made in Step 2, crimp to close. Attach crimp cover. Now slide on one 5810 6mm pearl, one 5328 4mm Fuchsia bead, one 5000 6mm Amethyst bead, one 5328 4mm Fuchsia bead, one 5810 6mm pearl, one 5328 4mm Fuchsia bead, one 5000 6mm Amethyst bead, one 5328 4mm Fuchsia bead, and one 5810 6mm pearl. Slide on one crimp bead and one beaded drop made in Step 1, crimp to close. Attach crimp cover. Repeat 12 more times and set aside.
  4. Find the middle link of the Rolo chain. Using the beaded drops from Step 3 attach one in the middle loop. Then add six more to the right of the middle drop and six more to the left of the middle drop.
  5. Using one jump ring attach one end of the Temple clasp to the end of the chain and then use the second jump ring to attach the other end of the Temple clasp to opposite end of the chain.

Temple Drop Earrings

Temple Drop Earrings

Swarovski Crystals: 
14    Swarovski 5328 4mm XILION Bicone Fuchsia
2    Swarovski 5000 8mm Faceted Round Fuchsia
4    Swarovski 5000 6mm Faceted Round Amethyst
6    Swarovski 5810 6mm Round Crystal Pearl Iridescent Purple
6    Swarovski 5040 6mm Briolette Bead Amethyst

Other Supplies:
2    TierraCast Antique Silver-Plated Pewter Temple Ring Link
1    Sterling Silver Earwire No Loop, Long Blank (Pair)
6    Sterling Silver 2 inch Ball-end Head Pin, 24 gauge
12”    20-Gauge Silver Tarnish-Resistant Artistic Wire, 6-Yard Spool

Instructions:

  1. Using one ball pin slide on one 5000 8mm Fuchsia bead and make a simple loop. Repeat 1 more time and set aside.
  2. Using one ball pin slide on one 5810 6mm Pearl and make a simple loop. Repeat 3 more times and set aside.
  3. Cut 20 gauge wire into six 2” pieces.
  4. Using one piece of wire, make a simple loop at one end, slide on one 5328 4mm Fuchsia bead, one 5000 6mm Amethyst bead, and one 5328 4mm Fuchsia bead and make a simple loop to close. Add on one pearl drop made in Step 2. Repeat 3 more times and set aside.
  5. Using one piece of wire, make a simple loop at one end, slide on one 5328 4mm Fuchsia bead, one 5810 6mm Pearl, and one 5328 4mm Fuchsia bead and make a simple loop to close. Add on one bead drop made in Step 1. Repeat 1 more time and set aside.
  6. Using one ear wire, slide on one 5328 4mm Fuchsia bead and one 5040 6mm Amethyst bead, make a simple loop to close. Repeat 1 more time and set aside.
  7. Using the Temple Ring add the ear wire made in Step 6 to large opening on the top. Then add the bead components from Step 5 to the center hole on the bottom. Then add the bead components from Step 4 to the left and right side holes.
  8. Repeat Step 7 to make second earring.

Celebrate Your Family

Design birthstone, zodiac and/or family heirloom jewelry with Swarovski® crystals and TierraCast® charms. Great for Mother’s Day, birthdays and family & friend gift-giving.

Birthstone Bracelet

Birthstone Bracelet

Swarovski Crystals: 
1    Swarovski 5000 8mm Faceted Round Amethyst
1    Swarovski 5040 8mm Briolette Bead Aquamarine
1    Swarovski 5328 8mm XILION Bicone Peridot
2    Swarovski 5328 6mm XILION Bicone Crystal
1    Swarovski 82103 14mm BeCharmed Pave Best Mom Bead Montana and Crystal Moonlight

Other Supplies:
1    TierraCast Silver-Plated Brass Handmade 12 Gauge Wire Bangle Bracelet
1    TierraCast Antique Silver-Plated Pewter Pisces Charm
1    TierraCast Antique Silver-Plated Pewter Leo Charm
1    TierraCast Antique Silver-Plated Pewter Aquarius Charm
4    Sterling Silver 2 inch Ball-end Head Pin, 24 gauge
3    925/10 Silver-Filled 4mm Open Jump Ring, 21 Gauge

Instructions:

  1. Attach a jump ring to each of the Zodiac Charms.
  2. Using one ball pin, slide on one 5040 8mm aquamarine bead and make a simple loop. Do the same for the Peridot and Amethyst beads and set aside.
  3. Using one ball pin, slide on one 5328 6mm Crystal bead, one Best Mom BeCharmed bead, one 5328 6mm Crystal bead and make a simple loop.
  4. Using all components made in Steps 1 – 3 arrange on bracelet in your own design.

Sagittarius Simplicity

Sagittarius Simplicity

Swarovski Crystals: 
9    Swarovski 5000 6mm Faceted Round Light Turquoise
18    Swarovski 5328 6mm XILION Bicone Blue Zircon

Other Supplies:
1    TierraCast Antique Silver-Plated Pewter Sagittarius Charm
6    TierraCast Antique Silver-Plated Pewter Botanical Branch Link
2    TierraCast Silver Antique Deco Rose 3-1 Link
1    Beadalon Silver-Plated Medium Lobster Clasp
4    TierraCast Silver-Plated Brass Medium Oval Open Jump Ring
18”    20-Gauge Silver Tarnish-Resistant Artistic Wire, 6-Yard Spool

Instructions:

  1. Cut Artistic wire into nine 2” pieces and set aside.
  2. Using one piece of wire make a simple loop. Slide on one 5328 6mm Blue Zircon bead, one 5000 6mm Light Turquoise bead, and one 5328 6mm Blue Zircon bead. Make a simple loop to close. Repeat eight more times and set aside.
  3. Using one Deco Rose Link and one beaded component made in Step 2 attach to the #1 loop on the link, then attach a Botanical Branch link to other side, attach another beaded component, then attach another Botanical Branch link and then attach a third beaded component. Finally attach to the #1 loop on the opposite Deco Rose link. Repeat this step for loops #2 and #3 on the Deco Rose link.
  4. Using one jump ring attach the lobster clasp to one end of the Deco Rose link.
  5. Using last 3 jump rings create a chain and attach one end to the end of the Deco Rose Link and the other end to the Sagittarius Charm.

College Life

You don’t have to be a sorority girl to make and wear these trendy bangle bracelets. Make multiple styles to wear together or stack with your other favorite bracelets!

Phi, The Golden Ratio, meets the Jet Set

Phi the Golden Ratio Meets the Jet Set

Swarovski Crystals: 
4    Swarovski 5000 8mm Faceted Round Jet
1    Swarovski 5000 8mm Faceted Round Crystal Golden Shadow
2    Swarovski 5000 6mm Faceted Round Jet
2    Swarovski 5328 6mm XILION Bicone Jet
4    Swarovski 5040 8mm Briolette Bead Crystal Golden Shadow

Other Supplies:
1    Artistic Wire Adjustable Bracelet and Ring Combination Findings Forms Tool
1pc 11” and 2 pcs 3”    Artbeads Designer Wire - Gold Non-Tarnish 18 Gauge (14 ft. spool)
1    TierraCast Antique Gold-Plated Pewter Greek Letter Charm - Phi
1    Round Nose Pliers
1    The BeadSmith Casual Comfort Flush Cutter Pliers

Instructions:

  1. Follow the Instructions on the Adjustable Oval Bangle Findings Form using the 11” piece of 18Ga wire but leave one of the ends without a loop (so you can get the beads on) also do not connect the loop until all beads and components have been added to the bracelet.
  2. Use the 3” pieces of 18Ga German Style Round Gold Color wire to make the “drops”. String one 5040 8mm crystal golden shadow bead, one 5328 6mm jet bead and one 5040 8mm crystal golden shadow bead onto the center of the wire, bend the sides of the wires at a 90 degree angle. Use the Round Nose Pliers to make a double loop on the end of each of the bent wires, making sure the loops are large enough to fit onto the Adjustable Bangle Bracelet. Make a second one of these.
  3. String one 6mm 5000 jet bead onto the open end of the Adjustable Oval Bangle bracelet then one 8mm 5000 Crystal golden shadow bead, then one more 6mm 5000 jet bead. These beads should be pushed all the way around the bracelet and will be the 3 beads that will be between the two loops or the top of the bracelet.
  4. String one 8mm 5000 jet bead onto the open end of the Adjustable Oval Bangle Bracelet followed by one of the components made in Step 2, then another 8mm 5000 jet bead, the Phi charm, another 8mm 5000 jet bead, the other component and a final 8mm 5000 jet bead.
  5. Carefully bend the loop on one end of the Bracelet and connect it to the base wire of the bracelet (see Findings Forms Instructions).
  6. Judge the length of the other end of the wire to and cut, then form a loop the same size as the one formed by the Findings Form, bend then attach to the wire making sure the first three beads strung on are captured in the moveable part of the adjustable bracelet between the two loops.

Golden Poseidon

Golden Poseidon

Swarovski Crystals: 
3    Swarovski 5810 8mm Round Crystal Pearl Vintage Gold
4    Swarovski 5810 6mm Round Crystal Pearl Vintage Gold
4    Swarovski 5810 4mm Round Crystal Pearl Vintage Gold

Other Supplies:
1    Beadalon 3D Bracelet Jig with Pegs
11”    Artbeads Designer Wire - Gold Non-Tarnish 16 Gauge (15 ft. coil)
2pc 4” each    Artbeads Designer Wire - Gold Non-Tarnish 20 Gauge (21 ft. spool)
1    TierraCast Antique Gold-Plated Pewter Greek Letter Charm - Psi
1    Round Nose Pliers
1    Lindstrom Shears
1    Wire Sizing Mandrels

Instructions:

  1. Use the 3D Bracelet Jig by placing a single peg in one hole on the first row of holes and secure it with the plastic holder.
  2. Place the 16Ga Round Wire onto the 3D Bracelet Jig and wrap the end of the wire around the first peg, then wrap the wire completely around the circumference of the Jig passing the first peg and around the jig. Then resize on the larger of the two Sizing Mandrels, by placing the loop onto the peg and drawing the wire down onto the surface of the mandrel, this should make the bangle to about a medium bracelet size.
  3. Use one of the pieces of 20Ga Wire and string on one 4mm, one 6mm, one 8mm, one 6mm, and one 4mm of the Crystal Pearls. Arrange these pearls into the center of the wire, bend the left wire at a right angle up, then bend the left wire down.
  4. Use the other piece of 20Ga wire to string on one 4mm, one 6mm, one 8mm, Psi Charm, one 8mm, one 6mm and one 4mm crystal pearl. Bend both ends of the wire up then make a loop large enough to fit over the 16ga wire about 4mm away from the bend.
  5. String the component made in step 4 onto the open end of the bangle bracelet, bend this component to match the curvature of the Bangle Bracelet curve.
  6. Carefully bend the end of the 16Ga wire in a loop to match the loop made on the 3D Bracelet Jig.
  7. Bend the loop so that it can be looped onto the wire, and do the same with the other end make sure the loops slide along the curved portion of the wire, for full adjustability
  8. Carefully make a loop on the one side of the component made in step 3 and attach to one of the 16Ga wires in between the two loops, then make another loop and attach this to the other wire between the two loops. This component should move freely within the confines of the two loops in the adjustable area.

Scarlet, Pearls & Pi

Scarlet Pearls and Pi


Swarovski Crystals: 
2    Swarovski 5810 4mm Round Crystal Pearlescent White Pearl
2    Swarovski 5810 6mm Round Crystal Pearlescent White Pearl
2    Swarovski 5810 8mm Round Crystal Pearlescent White Pearl
2    Swarovski 5040 6mm Briolette Bead Scarlet

Other Supplies:
1    Artistic Wire Adjustable Bracelet and Ring Combination Findings Forms Tool
1pc 11”, 2 pcs 6”    Artbeads Designer Wire - Gold Non-Tarnish 18 Gauge (14 ft. spool)
1pc 5”    Artbeads Designer Wire - Gold Non-Tarnish 20 Gauge (21 ft. spool)
1    TierraCast Antique Gold-Plated Pewter Greek Letter Charm - Pi
1    Round Nose Pliers
1    Lindstrom Shears

Instructions:

  1. Follow the Instructions on the Adjustable Oval Bangle Findings Form using the 18Ga German Style Round Wire but leave one of the ends without a loop (so you can get the beads on) also do not connect the loop until all beads and components have been added to the bracelet.
  2. Use the piece of 20Ga wire to string on one 4mm, one 6mm, one 8mm crystal pearl, and one 5040 6mm Scarlet bead, one Pi Charm, one 5040 6mm Scarlet bead, then one 8mm, one 6mm and one 4mm crystal pearl. Bend both ends of the wire up then make a loop large enough to fit over the 18ga wire about 4mm away from the bend. Make two loops on the ends of the wires approximately 4mm above the bend making sure the loops are large enough to go over the 18Ga wire.
  3. Open the Round Nose Pliers so that you can wrap one of the 6” pieces of wire around one of the round jaws of the pliers to create a coiled cone, stretch the cone to your desired length, then make the second one.
  4. String on one of the cones made in step 3 then string on the component from step 2 and finally the other coil from step 3.
  5. Cut the 18Ga wire to match the opposite side with the loop, then form a loop. Bend the loops so that they can be hooked onto the wire to make the adjustable Oval Bangle Bracelet.

Silver and Gold Sigma

Silver and Gold Sigma

Swarovski Crystals: 
4    Swarovski 5000 10mm Faceted Round Crystal
11    Swarovski 5040 8mm Briolette Bead Crystal Golden Shadow

Other Supplies:
1    Artistic Wire Adjustable Bracelet and Ring Combination Findings Forms Tool
1pc 11”, 1 pc 3”    925/10 Silver-Filled Wire Round 18 Gauge Half Hard - Approx. 1 troy oz (14ft)
1    TierraCast Antique Silver-Plated Pewter Greek Letter Charm - Sigma
1    Round Nose Pliers
1    Lindstrom Shears

Instructions:

  1. Follow the Instructions on the Adjustable Oval Bangle Findings Form using the 18Ga German Style Wire but leave one of the ends without a loop (so you can get the beads on) also do not connect the loop until all beads and components have been added to the bracelet.
  2. String on one 5000 10mm Crystal bead, three 5040 8mm Golden Shadow beads, one 5000 10mm Crystal bead, one 5040 8mm Golden Shadow bead, Sigma Charm, one 5040 8mm Golden Shadow bead, one 5000 10mm Crystal bead, three 5040 8mm Golden Shadow beads and one 5000 10mm Crystal bead.
  3. Cut the 18Ga wire to match the opposite side with the loop, then form a loop. Bend the loops so that they can be hooked onto the wire to make the adjustable Oval Bangle Bracelet.
  4. String on the remaining three 5040 8mm Golden Shadow beads to the short SilverFilled 18Ga round wire, then bend the wires at a 90 degree angle then angle one wire toward one of the two wires that bypass on the bracelet, angle the other wire to the other wire. Form loops with the Round Nose Pliers and attach one of these loops to one wire and the other loop to the other wire. Make sure this component moves freely on the two wires as they adjust the size of the bracelet.

Crystal Girl

Crystal Girl

Swarovski Crystals: 
4    Swarovski 5000 10mm Faceted Round Crystal
4    Swarovski 5040 6mm Briolette Bead Crystal
3    Swarovski 5810 6mm Round Crystal Pearl White
2    Swarovski 5328 6mm XILION Bicone Jet
1   Swarovski 5000 6mm Faceted Round Jet
1   Swarovski 5328 4mm XILION Bicone Crystal

Other Supplies:
1    Beadalon 3D Bracelet Jig with Pegs
14”    925/10 Silver-Filled Wire Round 18 Gauge Half Hard 1piece 11”, 1 piece 3”
1    TierraCast Antique Silver-Plated Pewter Greek Letter Charm - Xi
1    Round Nose Pliers
1    The BeadSmith Casual Comfort Flush Cutter Pliers
1    Wire Sizing Mandrels

Instructions:

  1. Place the 18 Gauge Round Wire onto the 3D Bracelet Jig and wrap the end of the wire around the first peg, then wrap the wire completely around the circumference of the Jig passing the first peg and around the jig. Then resize on the larger of the two Sizing Mandrels, by placing the loop onto the peg and drawing the wire down onto the surface of the mandrel, this should make the bangle to about a medium bracelet size.
  2. String onto the open end of the wire one 10mm 5000 Crystal bead, one 6mm 5040 Crystal bead, one 10mm 5000 Crystal bead, one 6mm 5040 Crystal bead, Xi Charm, one 6mm 5040 Crystal bead, one 10mm 5000 Crystal bead, one 6mm 5040 Crystal bead and one 10mm 5000 Crystal bead.
  3. Attach each of the remaining beads to the adjustability section of the Bangle Bracelet by wire wrapping them onto one or both of the adjustability wires.
  4. Finish the bracelet by cutting the un-looped portion to about the same size as the looped one then form a loop then bend the loops so that they can be attached to the wire.