Duration: 14 ms, Number of Items: 46

sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View
The BeadSmith Kumi Weight Lite with Hook
Choose Favorites List

The BeadSmith Kumi Weight Lite with Hook

$7.99

CodeSUP-0240
It's easy to create amazing kumihimo designs with the kumi weight lite from The Beadsmith. This weight is for use when creating kumihimo designs. You attach the weight to the end of your braid that goes through the center of your braiding disk. This weight will help keep braiding tension even, giving you a beautiful finished product. It's easy to attach this weight to the braid, thanks to the clip attached to the top. With this weight, your designs will come out right every time. It weighs approximately 45 grams.
  • BrandBeadSmith
4.8
4.8
Bead Buddy Junior Bead Board & Travel Case
Choose Favorites List

Bead Buddy Junior Bead Board & Travel Case

$23.99

CodeSUP-0238
You can create amazing jewelry anywhere you go with the Bead Buddy Junior. This case opens up to reveal a bead mat on both sides. Place your beads, tools and projects on one side, close the case and they will stay perfectly in place. This means you can take your works in progress with you wherever you may roam. The case also comes with a design template to help you make the perfect projects. With this case, you'll be prepared to bead anywhere and everywhere.
5.0
5.0
Dazzle-It Bead Board with Case
Choose Favorites List

Dazzle-It Bead Board with Case

$12.99

CodeSUP-0265
Plan your jewelry projects with ease using the Dazzle-It bead board with case. Use the bead board to measure out your next necklaces and bracelets. The board even features compartments you can use to store beads while working. The carrying case features pockets for tool and supply storage and the Velcro closure makes it easy to take your works in progress with you. Beading is a breeze with this bead board and case.
  • BrandDazzle-It
5.0
5.0
Bead Stopper 4 Pack-Teal tips
Choose Favorites List

Bead Stopper 4 Pack-Teal tips

$5.99

CodeBEADSTPR-08
Use these Bead Stoppers to avoid losing your beads while you work on your designs. Whether you are working on one strand or several, this wonderful tool will make your life easier. You will never lose a bead from the end of your strand again. Squeeze the teal ends together to grasp the ends of the wire you are working on and when you are ready to finish your design, simply release the wire and crimp. We believe the Bead Stopper is a miracle tool no beader should be without.
  • Place Of OriginUSA
4.0
4.0
The BeadSmith 11 x 14-Inch Bead Mat (3 Mats)
Choose Favorites List

The BeadSmith 11 x 14-Inch Bead Mat (3 Mats)

$3.64

CodeBEADMAT

Beads won't roll all over your table anymore with this 3-piece pack of 11 x 14-inch bead mats from The Beadsmith. Use these soft, machine-washable beading mats to cushion your designs and keep your beads in place. With this selection of beading surfaces you'll receive three separate mats in assorted colors, from yellow to cream or gray, so you can color coordinate your designs against your favorite backdrop. Not to be confused with bead boards, bead mats are important for any jewelry maker to have because they keep your beads from running off a table and are excellent for laying out design ideas. They also make beading easy when you're on the go, as they roll up and pack easily. Make sure you have plenty of bead mats wherever you have beads, so you're always ready to turn your jewelry ideas into something special.

  • BrandBeadSmith
  • Place Of OriginUSA
4.9
4.9
The Beadsmith Aluminum Scoop and Sort Tray (12pc Pack)
Choose Favorites List

The Beadsmith Aluminum Scoop and Sort Tray (12pc Pack)

$5.99

Code000-TOOL-0218
Get help in the jewelry designing process with the aluminum scoop and sort trays from The Beadsmith. These trays are triangular in shape and you can use them to scoop up beads. They are also great for sorting beads while working on projects. They are available in 12 piece packs, so you can sort beads for all kinds of projects. They nest up to each other really well, so you'll be able to see what colors complement each other best. They are a great option for static-prone supplies that cling to plastic tools. Try these bead scoops today. These trays measure approximately 3 1/4 inches.
  • BrandBeadSmith
5.0
5.0
Mini Bead Stopper 8pc Pack
Choose Favorites List

Mini Bead Stopper 8pc Pack

$6.49

CodeBEADSTPRMINI
Make sure your beads Don't go flying off strands in progress with the Mini Bead Stoppers. These small Bead Stoppers are great for delicate projects, especially those featuring seed beads. Clip a Bead Stopper to the end of the strand to stop accidental spills. You can even use them with multiple strands for a fast and simple solution. They are made from clean and lasting stainless steel, so you can use them again and again.
5.0
5.0
Beadalon Knot-A-Bead Tabletop Knotter Tool
Choose Favorites List

Beadalon Knot-A-Bead Tabletop Knotter Tool

$19.97

CodeTOOL-0189
It's easy to knot between beads with the Beadalon Knot-A-Bead tabletop knotter tool. This ergonomically designed tool allows for two-handed knotting. The large opening can accommodate any shape of bead up to 16mm in diameter. This tool is great for knotting between pearls, as it offers consistent knot placement. Use this tool with braided cords, cotton, leather, silk, satin cord and more. Directions for using this tool are included on the back of the packaging.
  • BrandBeadalon
  • FeaturesErgonomic
3.8
3.8
Beadalon 7.75x7.75-Inch Bead Mat (2 Piece)
Choose Favorites List

Beadalon 7.75x7.75-Inch Bead Mat (2 Piece)

$2.69

CodeSUP-0089
You can create a wonderful work space for your beading projects with the Beadalon 7.75x7.75-inch bead mats. Available by the pair, these bead mats feature a soft surface that you can lay your beads on. The texture of the mat will ensure they won't roll around and spill onto the ground. The pale color will allow colorful beads to be more easily seen. Every beader needs a reliable bead mat and these bead mats fit the bill. Stock up now so you'll be prepared for every beading project.
  • BrandBeadalon
5.0
5.0
4-Piece Elizabeth Ward Bead Storage Solutions Work in Progress Tray
Choose Favorites List

4-Piece Elizabeth Ward Bead Storage Solutions Work in Progress Tray

$24.99

CodeSUP-0546
You can store your projects with ease using the Bead Storage Solutions work in progress tray. This tray comes with a tray lid, a bead design board and a bead design board cover. The foam cover keeps projects in place while working. This compact storage solution is perfect for small components and it makes clean up a breeze. The clear lid makes it easy to find your projects after it has been stored. You can even take this bead storage tray on the go. This tray is 13.75x10.5x2 inches in size (or 14.76x26.67x5.08 cm).
5.0
5.0
The Beadsmith Plastic Scoop and Sort Tray
Choose Favorites List

The Beadsmith Plastic Scoop and Sort Tray

$0.99

CodeTOOL-0219
It's easy to work with beads when jewelry designing, using the plastic scoop and sort tray from The Beadsmith. This tray is triangular in shape and you can use it to scoop up beads. It is also great for sorting beads while working on projects. Use multiple to sort beads for all kinds of projects or try out color palettes. They nest up to each other really well, so you'll be able to see what colors complement each other best. Try this bead scoop today. This tray measures approximately 3 1/4 inches.
  • BrandBeadSmith
5.0
5.0
The BeadSmith 11 x 14-Inch Bead Tray
Choose Favorites List

The BeadSmith 11 x 14-Inch Bead Tray

$17.99

CodeSUP-0490
Be ready for any beading project with the 11x14 bead tray from The Beadsmith. This large, solid beading tray is great for containing your projects while working on them. The protected sides also make it easy to carry this tray around the house or any workspace. Bead while you watch TV, bead out on the patio, bead anywhere. The dark color of this tray will surely help colorful beads stand out, making them easier to spot. Add this tray to your supplies and make beading even easier.
  • BrandBeadSmith
5.0
5.0
Crystal Katana Rhinestone-Crystal Pick Up Tool
Choose Favorites List

Crystal Katana Rhinestone-Crystal Pick Up Tool

$28.95

CodeTOOL-0070
With the Crystal Katana rhinestone pick up tool, you can quickly and easily glue and place Flatback crystals. It includes an adapter for tiny SS9 to SS5 Flatback rhinestones. Made of premium jeweler's wax, the tip can be easily reshaped or rejuvenated. Award-winning designer Kelly DeFries of Crystal Ninja developed this essential Flatbacking tool. Why use anything else?
  • Place Of OriginUSA
5.0
5.0
Cobra Coiler Wire Tool
Choose Favorites List

Cobra Coiler Wire Tool

$39.89

CodeTOOL-0215
Coil wires with ease using the Cobra Coiler wire tool. This tool comes with a mountable coiler, two mandrels that are 1/8-inch and 1/16-inch in diameter, instructions for use and a carrying case. With this tool, you can make coiled beads, beaded coils and everything in between. All you have to do is secure the Cobra Coiler to your work table, insert and tighten your desired mandrel, slide the wire into one of the slots, hold the wire with one hand and wind the crank with the other. You can also use other mandrels with this tool, from mandrels as thin as a pin to mandrels slightly thicker than 1/4-inch in diameter. Note: For a limited time, the Cobra Coiler will include an extra mandrel. This mandrel is shaped like a triangle, so you can make fun and interesting shapes within your jewelry. This extra mandrel is included with the Cobra Coiler only while supplies last, so make sure to get yours today.
  • Place Of OriginUSA
4.6
4.6
The BeadSmith 1-Step 1.5mm Looper Plier
Choose Favorites List

The BeadSmith 1-Step 1.5mm Looper Plier

$29.87

CodeTOOL-0053
Create your own eye pins with The Beadsmith 1-Step 1.5mm Looper Plier. This tool allows you to trim and loop ready-made eye pins. You can even create eye pins in one motion. If you want to create custom length eye pins, you can do that, too. This tool works with precious metal wire, craft wire and copper or brass core wire. It bends and trims wire between 26 and 18 gauge in thickness. The looper will create a 1.5mm loop on wire 20 gauge or thicker, but it will leave a slight gap in the loop when using gauges thinner than 20 gauge. The 1-step looper is the perfect way to create professional-looking jewelry in no time.
  • BrandBeadSmith
  • FeaturesErgonomic
4.4
4.4
The Beadsmith Aluminum Scoop and Sort Tray
Choose Favorites List

The Beadsmith Aluminum Scoop and Sort Tray

$0.79

CodeTOOL-0218
Get help in the jewelry designing process with the aluminum scoop and sort tray from The Beadsmith. This tray is triangular in shape and you can use it to scoop up beads. It is also great for sorting beads while working on projects. Use multiple to sort beads for all kinds of projects and to try out color palettes. It's a great option for static-prone supplies that cling to plastic tools. They nest up to each other really well, so you'll be able to see what colors complement each other best. Try this bead scoop today. This tray measures approximately 3 1/4 inches.
  • BrandBeadSmith
5.0
5.0
Bead Stopper 4-Pack - Red Tips
Choose Favorites List

Bead Stopper 4-Pack - Red Tips

$5.99

CodeBEADSTPR-07
Clip this Bead Stopper to the end of your strand to avoid accidental spills while creating your designs. Simply pinch it to open and insert your wire. The red grips provide a touch of comfort and security that you'll love. Whether you are working on one strand or several, this wonderful tool will make your life easier. You will never lose a bead from the end of your strand again.
  • Place Of OriginUSA
4.5
4.5
The BeadSmith 1-Step 2.25mm Looper Plier
Choose Favorites List

The BeadSmith 1-Step 2.25mm Looper Plier

$29.87

CodeTOOL-0216
Create jewelry more efficiently with the 1-step 2.25mm looper plier from The Beadsmith. This tool creates and trims eye pins in one motion. It forms and trims wire between 24 and 18 gauge, so you can use it for almost any project. The tool creates a 2.25mm loop, giving you more room to add components. Use this tool to quickly create your own dangles and links. You'll love how easy it is to work with the 1-Step Looper.
  • BrandBeadSmith
  • FeaturesErgonomic
4.9
4.9
Dazzle-It Hot Fix Applicator
Choose Favorites List

Dazzle-It Hot Fix Applicator

$19.99

CodeTOOL-0194
Decorate designs with ease using the Dazzle-It Hot Fix applicator. Use this tool with heat-set stones such as Swarovski Hotfix Flatbacks to embellish fabrics, suede, paper, wood, crafts and more. An electric Hot Fix applicator, support stand, seven rhinestone tips and the HOTSPOT flat tip are all included. The tips are made for stones sizes 2mm/ss6, 2.5mm/ss8, 3mm/ss10, 4mm/ss16, 4mm/HOTSPOT, 5mm/ss20, 6mm/ss30 and 7mm/ss34. This tool is easy to use and will help you create sparkling designs.
  • BrandDazzle-It
5.0
5.0
Beadalon 9x12-Inch Bead Mat (3 Piece)
Choose Favorites List

Beadalon 9x12-Inch Bead Mat (3 Piece)

$2.99

CodeSUP-0041
Keep your styles and ideas in place with this pack of Beadalon bead mats. With this pack you'll receive three separate bead mats in a variety of assorted colors, from blue to cream or gray, so you can color coordinate your designs against your favorite backdrop. Bead mats are important for any jewelry maker to have because they keep your beads from running off a table and for laying out design ideas. Make sure your collection is stocked up on bead mats so you're always ready to style.
  • BrandBeadalon
  • Place Of OriginUSA
5.0
5.0
Chain Sta
Choose Favorites List

Chain Sta

$12.99

CodeCHNSTAY
This is the one tool every beader should have. Chain Sta allows you to securely clamp your chain in place while you attach charms and beads so that your design is precise and beautiful every time. It keeps your hands free to add charms and dangles exactly where you want. Please note that the chain and beading materials in the picture are for demonstrative purposes and are not included with the Chain Sta set. Simple assembly is required.
  • SoldIndividually
4.6
4.6
Beadalon 4.25x4.25-Inch Tacky Bead Mat
Choose Favorites List

Beadalon 4.25x4.25-Inch Tacky Bead Mat

$3.99

CodeSUP-0239
The Beadalon 4.25x4.25-inch Tacky Bead Mat will help keep your work surfaces clean and organized. This small, square mat will keep beads and other components perfectly in place while you work. Your beads will no longer roll all over. It doesn't leave a sticky residue on your beads, so you can use it with even your most cherished beads. If the mat gets dirty, simply "recharge" it by washing it under warm water until clean, let it dry and then it's ready to be used again.
  • BrandBeadalon
4.2
4.2
The BeadSmith 7.5x10.5 Inch Mini Macrame Board
Choose Favorites List

The BeadSmith 7.5x10.5 Inch Mini Macrame Board

$11.99

CodeTOOL-0157
Making cord designs is easy with the 7.5x10.5 inch mini macrame board from The Beadsmith. This small board is great for cord management, as it features notches on all sides to hold cords in place. You can use it for multiple cord projects like macrame, shamballa, decorative knotting and more. The grid on the surface of the board makes for easy measuring, the smooth surface won't snag cords and you can use pins in it without damaging the surface. It's small and lightweight, making it perfect for travel. Use this board for all of your cord designs.
  • BrandBeadSmith
5.0
5.0
The Beadsmith Plastic Scoop and Sort Tray (12pc Pack)
Choose Favorites List

The Beadsmith Plastic Scoop and Sort Tray (12pc Pack)

$9.99

Code000-TOOL-0219
It's easy to work with beads when jewelry designing, using the plastic scoop and sort trays from The Beadsmith. These trays are triangular in shape and you can use them to scoop up beads. They are also great for sorting beads while working on projects. They are available in 12 piece packs, so you can sort beads for all kinds of projects. They nest up to each other really well, so you'll be able to see what colors complement each other best. Try these bead scoops today. These trays measure approximately 3 1/4 inches.
  • BrandBeadSmith
0.0
0.0
sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View