Cut one piece of 065 cable chain to fit around your ankle. We cut ours 10 1/2 inches long to drape on the foot and allow for lots of movement.
Attach each sterling silver oval quality tag charm to the chain with one sterling silver 3.5x3mm 21 gauge oval jump ring. Count links of the cable chain to make spacing the charms easier. We left three links between each tag, you could leave more space and use fewer charms. Be certain to attach the charms on the same side of the chain for them to hang properly.
Connect two oval jump rings to the last link on each end of the chain. Attach the 7.8mm oval trigger clasp to the pair of jump rings on one end and the sterling silver medium closed jump ring to the pair of oval jump rings on the other end . Double jump rings were used in this design to keep the delicate appearance while insuring durability.
Thread the 4mm faceted round in Mint Alabaster, the 4mm round pearl in Pink Coral and the 3mm round pearl in Coral onto their own sterling silver 24 gauge 1-inch head pin. Finish the headpins with a wrapped loop and attach them to the oval jump rings on the clasp end of the anklet. To keep in scale with the chain size a small lobster claw clasp was used, the wrapped dangles aid in handling the clasp.
List of Components: 065 Cable Chain (925CH11, qty 1) Sterling Silver Oval Quality Tag Charm (SS-TAG02, qty 30) 7.8mm Oval Trigger Clasp - 925 Silver (SS-CL13, qty 1) Sterling Silver Medium Closed Jump Ring (0.76x4mm) (SS-CJR-MC, qty 1) Sterling Silver Oval Jump Ring 3.5x5.3mm, 21 gauge (SS-OJR-OV2, qty 34) 1-inch Head Pin, 24 Gauge (Sterling Silver) (SS-HP41, qty 3) 5000 4mm Faceted Round Mint Alabaster (5000-MAL4, qty 1) 5810 4mm Round Pearl Pink Coral (5810-PCO4, qty 1) 5810 3mm Round Pearl Coral (5810-COR3, qty 1)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Beach Gypsy
Sterling Silver Anklet with Oval Charms
designed byArtbeads
Skill LevelBeginner
Time1-3 Hours
Approximate Size10 1/2 Inches
The tags on this anklet act like little mirrors, catching the light and reflecting it in the sun.
Kick your shoes off and show off your foot fashion for summer This delightful ankle bracelet features just enough color to liven up an outfit.
Supplies
Side Cutters - Semi Flush
Code TOOL-131
$10.69
×1
7.8mm Oval Trigger Clasp - 925 Silver
Code SS-CL13
$1.29
×1
Round Nose Pliers
Code TOOL-108
$6.99
×1
Sterling Silver Medium Closed Jump Ring (0.76x4mm) - Min Qty 4
Code SS-CJR-MC
$0.32
×1
Sterling Silver Oval Jump Ring 3.5x5.3mm, 21 gauge - Min Qty 5
Code SS-OJR-OV2
$0.20
×34
1-inch Head Pin, 24 Gauge (Sterling Silver) - Min Qty 10
Code SS-HP41
$0.17
×3
065 Sterling Silver Cable Chain by the Foot
Code 925CH11
$14.89
×1
Chain Nose Pliers
Code TOOL-106
$6.99
×1
Step-by-Step Instructions
Cut one piece of 065 cable chain to fit around your ankle. We cut ours 10 1/2 inches long to drape on the foot and allow for lots of movement.
Attach each sterling silver oval quality tag charm to the chain with one sterling silver 3.5x3mm 21 gauge oval jump ring. Count links of the cable chain to make spacing the charms easier. We left three links between each tag, you could leave more space and use fewer charms. Be certain to attach the charms on the same side of the chain for them to hang properly.
Connect two oval jump rings to the last link on each end of the chain. Attach the 7.8mm oval trigger clasp to the pair of jump rings on one end and the sterling silver medium closed jump ring to the pair of oval jump rings on the other end . Double jump rings were used in this design to keep the delicate appearance while insuring durability.
Thread the 4mm faceted round in Mint Alabaster, the 4mm round pearl in Pink Coral and the 3mm round pearl in Coral onto their own sterling silver 24 gauge 1-inch head pin. Finish the headpins with a wrapped loop and attach them to the oval jump rings on the clasp end of the anklet. To keep in scale with the chain size a small lobster claw clasp was used, the wrapped dangles aid in handling the clasp.
List of Components: 065 Cable Chain (925CH11, qty 1) Sterling Silver Oval Quality Tag Charm (SS-TAG02, qty 30) 7.8mm Oval Trigger Clasp - 925 Silver (SS-CL13, qty 1) Sterling Silver Medium Closed Jump Ring (0.76x4mm) (SS-CJR-MC, qty 1) Sterling Silver Oval Jump Ring 3.5x5.3mm, 21 gauge (SS-OJR-OV2, qty 34) 1-inch Head Pin, 24 Gauge (Sterling Silver) (SS-HP41, qty 3) 5000 4mm Faceted Round Mint Alabaster (5000-MAL4, qty 1) 5810 4mm Round Pearl Pink Coral (5810-PCO4, qty 1) 5810 3mm Round Pearl Coral (5810-COR3, qty 1)