Nature is always inspiring to me. These bracelets reminds me of all of the beautiful forests in the Pacific Northwest.
Creating bracelets that can stack together is a fun way to try different beads together. This stretch bracelet set includes Czech glass beads in various shapes, TierraCast pewter beads, Dakota Stones gemstones, and even some fun charms from Anna Bronze. Wear them all together, choose just a few, or wear one alone. Discover more ideas for creating stylish stretch bracelets in this Artbeads Cafe episode.
Add approximately 42 fire-polished 4mm beads in ColorTrends Pacifica Ginger to 0.5mm Elasticity, or however many beads you need for a comfortable stretch bracelet. Keep in mind the knot will add about a quarter of an inch in length.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord.
One TierraCast brass oxide pewter small woodland bead
One fire-polished 6mm bead in ColorTrends Saturated Metallic
One Czech glass 5x3mm olivine and aqua with purple/gold marbled finish rondelle bead
One fire-polished bead
One woodland bead
One Czech glass 14mm pressed coin owl opaque meadow blue green Picasso with dark bronze wash bead
Repeat this pattern five times, leaving off the last owl coin bead.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the two woodland beads at the ends of the bracelet.,
Tube Bead Bracelet
Add the following pattern to 0.8mm Elasticity:
One Dakota Stones 8mm cool Dzi agate circle pattern round bead
One fire-polished 6mm bead in ColorTrends Pacifica Macadamia
One TierraCast 3mm brass oxide pewter plain heishi spacer
One Czech glass 4mm matte transparent sage green with gold/green luster faceted round bead
One plain spacer
One 6mm fire-polished bead
One Dzi bead
One TierraCast brass oxide pewter 10mm hammered tube bead
Repeat this pattern three times.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the last tube bead.,
Small Dagger Bead Bracelet
Add a TierraCast 7mm brass oxide finish pewter nugget spacer bead with 2mm hole to 0.5mm Elasticity and then add the following pattern:
One TierraCast gold antique 4mm stepped bead cap
Three Czech glass 10x3mm small dagger topaz and yellow mix with blue Picasso beads
One bead cap
Three Czech glass 5x3mm transparent Montana blue with antique gold finish rondelle beads
Repeat this pattern eight times, leaving off the last three rondelle beads.
Add a 7mm spacer to the cord and then tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the two 7mm spacers.,
Flower Bracelet
Add the following pattern to 0.8mm Elasticity:
One TierraCast 5mm brass oxide finish pewter nugget spacer bead
One Czech glass 12mm yolk yellow with dark bronze finish hibiscus flower bead
One spacer
One Czech glass 12x10mm matte dark bronze old style drop bead
One spacer
One drop bead
Repeat this pattern three times, then add a spacer, a flower, a spacer, and a TierraCast brass oxide pewter 22mm lotus petal spacer.
Tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the petal spacer.,
Leaf Charm Bracelet
Add the following pattern to 0.8mm Elasticity:
One TierraCast brass oxide pewter 8mm round Jardin bead
Five or six Dakota Stones 6mm Dzi agate line pattern round beads
Repeat this pattern four times.
Tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord.
Attach two Anna Bronze antique brass double-sided leaf charms to the bracelet over the knot using an 8mm 18g brass jump ring with patina finish for each charm. Add three Anna Bronze antique brass small fern leaf charms to one jump ring and attach it somewhere to the front of the bracelet.
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Into the Woods
Earthy Stretch Cord Bracelets with Owls, Flowers, and Leaves
designed byCynthia Kimura
Skill LevelBeginner
TechniqueSimple Stringing
Time1-3 Hours
Approximate SizeAdjustable
Nature is always inspiring to me. These bracelets reminds me of all of the beautiful forests in the Pacific Northwest.
Creating bracelets that can stack together is a fun way to try different beads together. This stretch bracelet set includes Czech glass beads in various shapes, TierraCast pewter beads, Dakota Stones gemstones, and even some fun charms from Anna Bronze. Wear them all together, choose just a few, or wear one alone. Discover more ideas for creating stylish stretch bracelets in this Artbeads Cafe episode.
Add approximately 42 fire-polished 4mm beads in ColorTrends Pacifica Ginger to 0.5mm Elasticity, or however many beads you need for a comfortable stretch bracelet. Keep in mind the knot will add about a quarter of an inch in length.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord.
One TierraCast brass oxide pewter small woodland bead
One fire-polished 6mm bead in ColorTrends Saturated Metallic
One Czech glass 5x3mm olivine and aqua with purple/gold marbled finish rondelle bead
One fire-polished bead
One woodland bead
One Czech glass 14mm pressed coin owl opaque meadow blue green Picasso with dark bronze wash bead
Repeat this pattern five times, leaving off the last owl coin bead.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the two woodland beads at the ends of the bracelet.,
Tube Bead Bracelet
Add the following pattern to 0.8mm Elasticity:
One Dakota Stones 8mm cool Dzi agate circle pattern round bead
One fire-polished 6mm bead in ColorTrends Pacifica Macadamia
One TierraCast 3mm brass oxide pewter plain heishi spacer
One Czech glass 4mm matte transparent sage green with gold/green luster faceted round bead
One plain spacer
One 6mm fire-polished bead
One Dzi bead
One TierraCast brass oxide pewter 10mm hammered tube bead
Repeat this pattern three times.
Tie the stretch cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the last tube bead.,
Small Dagger Bead Bracelet
Add a TierraCast 7mm brass oxide finish pewter nugget spacer bead with 2mm hole to 0.5mm Elasticity and then add the following pattern:
One TierraCast gold antique 4mm stepped bead cap
Three Czech glass 10x3mm small dagger topaz and yellow mix with blue Picasso beads
One bead cap
Three Czech glass 5x3mm transparent Montana blue with antique gold finish rondelle beads
Repeat this pattern eight times, leaving off the last three rondelle beads.
Add a 7mm spacer to the cord and then tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the two 7mm spacers.,
Flower Bracelet
Add the following pattern to 0.8mm Elasticity:
One TierraCast 5mm brass oxide finish pewter nugget spacer bead
One Czech glass 12mm yolk yellow with dark bronze finish hibiscus flower bead
One spacer
One Czech glass 12x10mm matte dark bronze old style drop bead
One spacer
One drop bead
Repeat this pattern three times, then add a spacer, a flower, a spacer, and a TierraCast brass oxide pewter 22mm lotus petal spacer.
Tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord and hide the knot in the petal spacer.,
Leaf Charm Bracelet
Add the following pattern to 0.8mm Elasticity:
One TierraCast brass oxide pewter 8mm round Jardin bead
Five or six Dakota Stones 6mm Dzi agate line pattern round beads
Repeat this pattern four times.
Tie the cord ends together using a surgeons knot. Add a small amount of glue to the knot and allow to dry. Trim excess cord.
Attach two Anna Bronze antique brass double-sided leaf charms to the bracelet over the knot using an 8mm 18g brass jump ring with patina finish for each charm. Add three Anna Bronze antique brass small fern leaf charms to one jump ring and attach it somewhere to the front of the bracelet.