WireLace ribbon is flexible and ruffles easily, so it made the perfect backdrop for the pearls in this necklace.
Like a grape vine overflowing with ripe fruit, this necklace displays juicy style. Rich purple pearls take center stage, against green and copper WireLace "leaves." Learn how to make this necklace and add delicious style to your looks
Cut a length of jewelry wire approximately eight inches long. Crimp the end to the eye of the 1/20 14K rose gold-filled 1.5-inch 24 gauge eye pin using a sterling silver 2x2mm crimp tube.
Cut a length of WireLace 6mm grass ribbon and a length of WireLace 6mm copper ribbon approximately eight inches long each. Shape and stretch them with your fingers so that they are curvier and fluffier in appearance. Tie the ends of the WireLace strands in a knot. Poke the end of the eye pin through the knot. Then, bring the jewelry wire through holes in the knitted mesh of the two WireLace strands. Your jewelry wire and WireLace strands should be attached and match up in length.
String an 8mm round pearl in Blackberry onto the jewelry wire. Slide your jewelry wire through holes in the knitted mesh of the WireLace strands, so that a section of WireLace nests behind the pearl. Repeat this process 13 times. You can reshape your WireLace as you go to create a fluffier look.
Crimp the open end of the jewelry wire to an eye pin using a crimp tube. Tie the ends of the WireLace strands in a knot just above the eye of the eye pin.
Slide a JBB copper-plated pewter end cap onto an eye pin, to cover the end of the WireLace and jewelry wire. Add a 5mm round pearl in Copper to the eye pin and make a wrapped loop. Repeat on the other side of the necklace.
Cut a length of copper hammered-textured cable chain approximately five and a quarter of an inch long. Attach one end to a wrapped loop using a 5mm copper 20 gauge open jump ring. Add half of the JBB copper-plated pewter star-shaped flower toggle clasp to the end of the chain using another jump ring. Repeat this step for the other side of the necklace.
List of Components: WireLace Ribbon 6mm Grass, 1 Yd (STRNG-0226, qty 1) WireLace Ribbon 6mm Copper, 1 Yd (STRNG-0225, qty 1) 5810 8mm Round Pearl Blackberry (5810-BKB8, qty 14) Copper Hammered-Textured Cable Chain (BTF-0287, qty 2) JBB Copper-Plated Pewter End Cap (PC-BD004, qty 2) 5810 5mm Round Pearl Copper (5810-COP5, qty 2) 1/20 14K Rose Gold-Filled 1.5-Inch Eye Pin 24 Gauge (FIND-1524, qty 2) 5mm Copper 20 Gauge Open Jump Ring (FIND-1044, qty 4) JBB Copper-Plated Pewter Star-Shaped Flower Toggle Clasp (PC-TOG015, qty 1) Sterling Silver 2 x 2mm Crimp Tube (SS-CRM2, qty 2)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Grapes on the Vine Necklace Tutorial
WireLace and Purple Pearl Necklace
designed byCynthia Kimura
Skill LevelBeginner
Time1-3 Hours
Approximate Size9 Inches
WireLace ribbon is flexible and ruffles easily, so it made the perfect backdrop for the pearls in this necklace.
Like a grape vine overflowing with ripe fruit, this necklace displays juicy style. Rich purple pearls take center stage, against green and copper WireLace "leaves." Learn how to make this necklace and add delicious style to your looks
Sterling Silver 2 x 2mm Crimp Tube Bead - Min Qty 10
Code SS-CRM2
$0.14
×2
Bead Crimper Tool
Code TOOL-100
$13.09
×1
14K/20 Rose Gold-Filled 1.5-Inch Eye Pin 24 Gauge - Min Qty 2
Code FIND-1524
$0.72
×2
German Round Nose Pliers
Code TOOL-502
$28.79
×1
5mm Copper 20 Gauge Open Jump Ring - Min Qty 45
Code FIND-1044
$0.03
×4
JBB Copper-Plated Pewter End Cap
Code PC-BD004
$1.19
×2
Step-by-Step Instructions
Cut a length of jewelry wire approximately eight inches long. Crimp the end to the eye of the 1/20 14K rose gold-filled 1.5-inch 24 gauge eye pin using a sterling silver 2x2mm crimp tube.
Cut a length of WireLace 6mm grass ribbon and a length of WireLace 6mm copper ribbon approximately eight inches long each. Shape and stretch them with your fingers so that they are curvier and fluffier in appearance. Tie the ends of the WireLace strands in a knot. Poke the end of the eye pin through the knot. Then, bring the jewelry wire through holes in the knitted mesh of the two WireLace strands. Your jewelry wire and WireLace strands should be attached and match up in length.
String an 8mm round pearl in Blackberry onto the jewelry wire. Slide your jewelry wire through holes in the knitted mesh of the WireLace strands, so that a section of WireLace nests behind the pearl. Repeat this process 13 times. You can reshape your WireLace as you go to create a fluffier look.
Crimp the open end of the jewelry wire to an eye pin using a crimp tube. Tie the ends of the WireLace strands in a knot just above the eye of the eye pin.
Slide a JBB copper-plated pewter end cap onto an eye pin, to cover the end of the WireLace and jewelry wire. Add a 5mm round pearl in Copper to the eye pin and make a wrapped loop. Repeat on the other side of the necklace.
Cut a length of copper hammered-textured cable chain approximately five and a quarter of an inch long. Attach one end to a wrapped loop using a 5mm copper 20 gauge open jump ring. Add half of the JBB copper-plated pewter star-shaped flower toggle clasp to the end of the chain using another jump ring. Repeat this step for the other side of the necklace.
List of Components: WireLace Ribbon 6mm Grass, 1 Yd (STRNG-0226, qty 1) WireLace Ribbon 6mm Copper, 1 Yd (STRNG-0225, qty 1) 5810 8mm Round Pearl Blackberry (5810-BKB8, qty 14) Copper Hammered-Textured Cable Chain (BTF-0287, qty 2) JBB Copper-Plated Pewter End Cap (PC-BD004, qty 2) 5810 5mm Round Pearl Copper (5810-COP5, qty 2) 1/20 14K Rose Gold-Filled 1.5-Inch Eye Pin 24 Gauge (FIND-1524, qty 2) 5mm Copper 20 Gauge Open Jump Ring (FIND-1044, qty 4) JBB Copper-Plated Pewter Star-Shaped Flower Toggle Clasp (PC-TOG015, qty 1) Sterling Silver 2 x 2mm Crimp Tube (SS-CRM2, qty 2)