Golden Grace

Woven Green and Gold Crystal and Pearl Bracelet

Skill LevelBeginner

TechniqueSeed-Beading

Time1-3 Hours

Approximate Size6 1/4 Inches

This bracelet uses a simple weave to create a looped effect. author signature

Green and gold tones blend gracefully together in this warm-toned bracelet. Our bracelet measures about 6.25 inches. To extend the length to fit a larger wrist, simply add more jump rings to the ends.

Step-by-Step Instructions Expand All Steps

Begin by linking three gold-filled open jump rings and attaching them to the 9mm gold-filled toggle clasp. Cut two strands of Artbeads Designer Jewelry Wire to approximately 15 inches. Attach the wire to the jump rings using a 2x2mm gold-filled crimp tube. Cover the tube with a 3mm gold-filled crimp cover.

Opening and Closing Jump Rings Video
Crimp Tool Tutorial
Crimp Tube Video Tutorial
Crimp Cover Tutorial

Slide both wires through a 3mm gold faceted heishi spacer. At this point you will separate the wires and add five color-lined sparkle crystal/brass delica beads to each side. Take a 6mm light Smoked Topaz faceted bicone and put one wire through from each side so that they cross in the center (see diagram). Add eight delicas on both sides and then cross through a 6mm Khaki faceted bicone. Follow with eight delicas and cross the wires through an 8mm Bright Gold round pearl. Repeat with eight delicas and an 8mm light green round pearl, then eight more delicas and a Bright Gold pearl.

As you cross out of the last pearl, string one light Smoked Topaz bicone on each side, then run the wires through a Light Green pearl. Follow with a Khaki bicone on each side and a Bright Gold pearl. This is your center bead. From here, you simply reverse the pattern and work back toward your clasp.

List of Components:
TierraCast® gold 3mm faceted heishi spacer (G-0422, qty 2)
8g color-lined sparkle crystal/brass delicas (DB0909, qty 1)
5301 6mm faceted bicone Khaki (5328-KHAK6, qty 6)
5328 6mm Bicone Light Smoked Topaz(5328-TOSMKLT6, qty 6)
5810 8mm round pearl Bright Gold (5810-BGOLD8, qty 5)
5810 8mm round pearl Light Green (5810-GRLT8, qty 4)
14/20 gold-filled 9mm toggle clasp (GF-TOG03, qty 1)
14K/20 gold-filled 2x2mm crimp tube (GF-CRM2, qty 2)
Gold-filled 14k open jump ring (0.6x3.3mm) (GF-OJR25-C, qty 6)
3mm gold-filled crimp cover (GF-CCOV01, qty 2)

PRINT THIS PAGE

Add all available items to your cart at once or edit the quantities below. Any items with quantities lower than stated minimums will default to the minimum in your cart.

Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!