This jewelry set was made with our exclusive Czech glass sampler tin in blue, available only in our Artbeads Rewards Center. The tin is the perfect way to get familiar with various Czech glass shapes, like bell flowers, Finial beads, Teacups, and more. Mix the contents of the tin with other beads to make your own fun color palette, as shown in this jewelry set. Redeem the rewards tin with our link above or take a look at our Perfect Product Pairings for similar beads to use in the design.
Cut a length of 22 gauge Gold Artbeads Designer Wire approximately 2 inches long. Glue a dark purple Finial bead from the rewards tin onto the bottom of the wire using a 5-minute two-part epoxy adhesive. Repeat five times for a total of six custom deep purple head pins. Allow to dry.
Cut a length of jewelry wire approximately seven inches long. Slide a 14K/20 gold-filled 2x2 crimp tube onto the wire, followed by the large round jump ring from the tin. Bring the wire back through the crimp tube and crimp in place. Hide the crimp with a 4mm gold-plated crimp cover. Repeat this step on the other side of the same jump ring.
Crimp Tool Tutorial
Crimp Tube Video Tutorial
Crimp Cover Tutorial
Make a mirror image of this bead pattern on the jewelry wire on the other side of your bracelet.
Slide a Teacup bead, a bell flower, and a teacup bead from the tin onto a mauve head pin, followed by a Hazelnut bead. Make a wrapped loop at the top of the beads.
Nice choice! All or most of the products needed for this project are shown below with quantities. Sometimes we sell out of components and aren’t able to order more from the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up the design and make it yours by substituting similar products or altering the entire color scheme—it’s up to you!
This jewelry set was made with our exclusive Czech glass sampler tin in blue, available only in our Artbeads Rewards Center. The tin is the perfect way to get familiar with various Czech glass shapes, like bell flowers, Finial beads, Teacups, and more. Mix the contents of the tin with other beads to make your own fun color palette, as shown in this jewelry set. Redeem the rewards tin with our link above or take a look at our Perfect Product Pairings for similar beads to use in the design.
Cut a length of 22 gauge Gold Artbeads Designer Wire approximately 2 inches long. Glue a dark purple Finial bead from the rewards tin onto the bottom of the wire using a 5-minute two-part epoxy adhesive. Repeat five times for a total of six custom deep purple head pins. Allow to dry.
Cut a length of jewelry wire approximately seven inches long. Slide a 14K/20 gold-filled 2x2 crimp tube onto the wire, followed by the large round jump ring from the tin. Bring the wire back through the crimp tube and crimp in place. Hide the crimp with a 4mm gold-plated crimp cover. Repeat this step on the other side of the same jump ring.
Crimp Tool Tutorial
Crimp Tube Video Tutorial
Crimp Cover Tutorial
Make a mirror image of this bead pattern on the jewelry wire on the other side of your bracelet.
Slide a Teacup bead, a bell flower, and a teacup bead from the tin onto a mauve head pin, followed by a Hazelnut bead. Make a wrapped loop at the top of the beads.