Finial Flowers Necklace Tutorial

Cut six lengths of Silver 22 gauge Artbeads Designer Wire 6 inches long each. Glue a Czech glass matte jet half-drilled 2mm round Finial bead onto the end of each wire using 5-minute epoxy adhesive and allow to dry. Set aside for now.

Using Two-Part Epoxy Adhesive Video Tutorial
How to Use Finial Beads

Cut five lengths of Black 22 gauge Artbeads Designer Wire 6 inches long each. Glue a Czech glass opaque white half-drilled 2mm round finial bead onto the end of each wire using 5-minute epoxy adhesive and allow to dry. Set aside for now.

Add a Czech glass 8x6mm crystal AB bell flower bead to each silver wire and add a Czech glass 8x6mm matte jet vitral bell flower bead to each black wire.

Attach a jet bell flower to the center of the TierraCast silver-plated brass 20mm small wire hoop by coiling the wire around the hoop. Make several coils and trim the wire to the back of the hoop. Attach a crystal AB bell flower to each side of the jet bell flower in the same manner.

Attach the decorated hoop to the center link of a 2-foot length of 5x4.5mm silver-plated flat cable chain using a bright silver anodized aluminum 7.5mm 18 gauge open jump ring.

Opening and Closing Jump Rings Video

Attach a crystal AB bell flower two links over to the right of the hoop by making a wrapped loop. Instead of trimming the wrapped loop, continue the wrap down around the top of the bell flower bead.

Wrapped Loop Tutorial

Attach a jet bell flower to the top of this same link by coiling the wire around the link.

Attach a crystal AB bell flower to the next link over by coiling the wire around the link.

Attach a jet bell flower to the next link over by coiling the wire around the link.

Attach a crystal AB bell flower to the third link over from the left of the center hoop by coiling the wire around the link.

Attach a jet bell flower two links over from that by making a wrapped loop.

Attach a crystal AB bell flower to the top of this same link by coiling the wire around the link.

Attach a jet bell flower to the next link over by coiling the wire around the link.

Attach a crystal AB bell flower to the next link over by coiling the wire around the link.

Attach a TierraCast silver-plated 15x9mm lobster clasp about 8-inches up from the center of the necklace on one side of the chain using a jump ring.

List of Components
Czech Glass 8 x 6mm Matte Jet Vitral Bell Flower Bead Strand by Starman (BEADS5489, qty 1)
Czech Glass 8 x 6mm Crystal AB Bell Flower Bead Strand by Starman (BEADS5456, qty 1)
Czech Glass Matte Jet Half-Drilled 2mm Round Finial Bead 2.5-Inch Tube by Starman (FIN0035, qty 1)
Czech Glass Opaque White Half-Drilled 2mm Round Finial Bead 2.5-Inch Tube by Starman (A384-02-0300, qty 1)
TierraCast Silver-Plated Brass 20mm Small Wire Hoop (SP0400, qty 1)
5x4.5mm Silver-Plated Flat Cable Chain By the Foot (BTF-0601, qty 2)
Artbeads Designer Wire - Silver Non-Tarnish 22 Gauge (24 ft. spool) (ADW0073, qty 1)
Artbeads Designer Wire - Black Non-Tarnish 22 Gauge (45 ft. spool) (ADW0067, qty 1)
TierraCast Silver-Plated 15 x 9mm Lobster Clasp (SP-0111, qty 1)
Bright Silver Anodized Aluminum 7.5mm 18 gauge Open Jump Ring (FIND-1117, qty 2)