I used iridescent green seed beads to set this dragonfly in an enchanting forest.
Step into woodland whimsy with this Dragonfly Daydream necklace. With its fresh, modern colors and enchanting beaded accents, this necklace will become the focus of any stylish look.
Glue the porcelain round dragonfly cabochon onto a sheet of bead backing and allow to dry. Create a row of seed beads around the cabochon using the two-seed-bead backstitch around the cabochon with the TOHO 8/0 bead rounds in frosted trans-rainbow moss green AB. Create a second row using the two-seed-bead backstitch with 4mm faceted rounds in Chrysolite Opal and then make a third row using more of the trans-rainbow moss green AB TOHOs.
Trim the bead backing and then glue a piece of felt to the back. Create a beaded edge with the brick stitch technique using more trans-rainbow moss green AB TOHOs.
Finish the trim with a picot edge. For each stitch in the picot edge you will use one trans-rainbow moss green AB TOHO, a TOHO 11/0 bead round in frosted silver-lined light gold and another trans-rainbow moss green AB TOHO.
Rub some gilders paste in patina onto the Kabela Design antique brass vined heart link. After 15 minutes, smooth it with a soft cloth and seal it with the Nunn Design sealant. Allow to dry. Center the link at the top of your focal and sew it onto the back. Use 5-minute two-part epoxy to glue it in place for an extra secure hold and let dry overnight.
Thread a 4mm Chrysolite Opal faceted round onto a 2-inch satin Hamilton gold-plated 20 gauge eye pin, followed by a trans-rainbow moss green AB TOHO, a 6mm bicone in Pacific Opal, another trans-rainbow moss green AB TOHO and another 4mm Chrysolite Opal faceted round. Finish the other end of the eye pin with a simple loop. Repeat this step five times and set these beaded links aside.
Cut a length of the satin Hamilton gold-plated big, medium, and small oval link chain approximately 1 1/2 inches long or nine links. Attach it to the link at the top of your focal using a 6mm satin Hamilton gold-plated 18 gauge open jump ring. On the other end of the chain, attach a beaded link using another jump ring. At the end of the beaded link add a jump ring and then attach another beaded link. At the end of this beaded link, add a jump ring and attach a third beaded link. Cut a length of chain approximately 4 1/2 inches long or 23 links. Attach it to the end of the beaded link using a jump ring. Add one half of the TierraCast 3/4-inch antique gold-plated pewter Anna's toggle and clasp to the end of the chain using a jump ring. Repeat step six for the other side of the necklace.
List of Components: Porcelain Round Dragonfly Cabochon (CAB-0127, qty 1) TOHO Bead Round 8/0 Frosted Trans-Rainbow Moss Green AB (TBRD8-180F, qty 1) TOHO Bead Round 11/0 Frosted Silver-Lined Light Gold (TBRD11-22F, qty 1) 5000 4mm Faceted Round Chrysolite Opal (5000-CHO4, qty 48) 5328 6mm Bicone Pacific Opal (5328-PACOP6, qty 6) Kabela Design Antique Brass Vined Heart Link (BBA-LX11, qty 1) Satin Hamilton Gold-Plated Big, Medium, and Small Oval Link Chain (BTF-0067, qty 1) 2-inch Satin Hamilton Gold-Plated 20 Gauge Eye Pin (FIND-0450, qty 6) 6mm Satin Hamilton Gold-Plated Open Jump Ring - 18 Gauge (FIND-0471, qty 12) TierraCast 3/4-Inch Antique Gold-Plated Pewter Anna's Toggle and Clasp 26x31.5mm (GA-6160, qty 1) The BeadSmith 4.25x5.5-Inch White Bead Backing (EMB-0022, qty 1) Gilders Paste Baroque-Art 30ml/1.5oz - Patina (SUP-0001, qty 1) Nunn Design Sealant 2oz (SEALANT01, qty 1)
Add all available items to your cart at once or edit the quantities below.
Any items with quantities lower than stated minimums will default to the minimum in your cart.
Nice choice! All or most of the products needed for this project are shown
below with quantities. Sometimes we sell out of components and aren’t able to order more from
the manufacturer (we know, it is very disappointing to us, too). Use the opportunity to mix up
the design and make it yours by substituting similar products or altering the entire color
scheme—it’s up to you!
Please wait while we add the products to your cart.
Dragonfly Daydream Necklace Tutorial
Porcelain Dragonfly and Bead Embroidery Necklace
designed byCynthia Kimura
Skill LevelIntermediate
TechniqueBead Embroidery
Time4-6 Hours
Approximate Size14 Inches -Or- 21 Inches
I used iridescent green seed beads to set this dragonfly in an enchanting forest.
Step into woodland whimsy with this Dragonfly Daydream necklace. With its fresh, modern colors and enchanting beaded accents, this necklace will become the focus of any stylish look.
Supplies
2-inch Satin Hamilton Gold-Plated 20 Gauge Eye Pin - Min Qty 4
Code FIND-0450
$0.27
×6
TOHO Bead Round 11/0 Frosted Silver-Lined Light Gold, 2.5-Inch Tube
Code TBRD11-22F
$1.36
$1.69
×1
German Chain Nose Pliers
Code TOOL-500
$28.79
×1
The BeadSmith 12 Short Beading Needles 12-Pack
Code NEED-11
$3.19
×1
German Side Cutter
Code TOOL-503
$35.79
×1
6mm Satin Hamilton Gold-Plated Open Jump Ring - 18 Gauge - Min Qty 20
Code FIND-0471
$0.06
×12
Nymo D Bobbin Turquoise
Code NYD-TQ
$2.89
×1
German Round Nose Pliers
Code TOOL-502
$28.79
×1
Step-by-Step Instructions
Glue the porcelain round dragonfly cabochon onto a sheet of bead backing and allow to dry. Create a row of seed beads around the cabochon using the two-seed-bead backstitch around the cabochon with the TOHO 8/0 bead rounds in frosted trans-rainbow moss green AB. Create a second row using the two-seed-bead backstitch with 4mm faceted rounds in Chrysolite Opal and then make a third row using more of the trans-rainbow moss green AB TOHOs.
Trim the bead backing and then glue a piece of felt to the back. Create a beaded edge with the brick stitch technique using more trans-rainbow moss green AB TOHOs.
Finish the trim with a picot edge. For each stitch in the picot edge you will use one trans-rainbow moss green AB TOHO, a TOHO 11/0 bead round in frosted silver-lined light gold and another trans-rainbow moss green AB TOHO.
Rub some gilders paste in patina onto the Kabela Design antique brass vined heart link. After 15 minutes, smooth it with a soft cloth and seal it with the Nunn Design sealant. Allow to dry. Center the link at the top of your focal and sew it onto the back. Use 5-minute two-part epoxy to glue it in place for an extra secure hold and let dry overnight.
Thread a 4mm Chrysolite Opal faceted round onto a 2-inch satin Hamilton gold-plated 20 gauge eye pin, followed by a trans-rainbow moss green AB TOHO, a 6mm bicone in Pacific Opal, another trans-rainbow moss green AB TOHO and another 4mm Chrysolite Opal faceted round. Finish the other end of the eye pin with a simple loop. Repeat this step five times and set these beaded links aside.
Cut a length of the satin Hamilton gold-plated big, medium, and small oval link chain approximately 1 1/2 inches long or nine links. Attach it to the link at the top of your focal using a 6mm satin Hamilton gold-plated 18 gauge open jump ring. On the other end of the chain, attach a beaded link using another jump ring. At the end of the beaded link add a jump ring and then attach another beaded link. At the end of this beaded link, add a jump ring and attach a third beaded link. Cut a length of chain approximately 4 1/2 inches long or 23 links. Attach it to the end of the beaded link using a jump ring. Add one half of the TierraCast 3/4-inch antique gold-plated pewter Anna's toggle and clasp to the end of the chain using a jump ring. Repeat step six for the other side of the necklace.
List of Components: Porcelain Round Dragonfly Cabochon (CAB-0127, qty 1) TOHO Bead Round 8/0 Frosted Trans-Rainbow Moss Green AB (TBRD8-180F, qty 1) TOHO Bead Round 11/0 Frosted Silver-Lined Light Gold (TBRD11-22F, qty 1) 5000 4mm Faceted Round Chrysolite Opal (5000-CHO4, qty 48) 5328 6mm Bicone Pacific Opal (5328-PACOP6, qty 6) Kabela Design Antique Brass Vined Heart Link (BBA-LX11, qty 1) Satin Hamilton Gold-Plated Big, Medium, and Small Oval Link Chain (BTF-0067, qty 1) 2-inch Satin Hamilton Gold-Plated 20 Gauge Eye Pin (FIND-0450, qty 6) 6mm Satin Hamilton Gold-Plated Open Jump Ring - 18 Gauge (FIND-0471, qty 12) TierraCast 3/4-Inch Antique Gold-Plated Pewter Anna's Toggle and Clasp 26x31.5mm (GA-6160, qty 1) The BeadSmith 4.25x5.5-Inch White Bead Backing (EMB-0022, qty 1) Gilders Paste Baroque-Art 30ml/1.5oz - Patina (SUP-0001, qty 1) Nunn Design Sealant 2oz (SEALANT01, qty 1)