sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View
Memory Wire Shear
Choose Favorites List

Memory Wire Shear

$14.99

CodeTOOL-104
Easily cut through wire with these memory wire shears. This memory wire shear has hardened 90-degree jaws that easily slice through spring-tempered wire, leaving a clean and safe-to-handle straight edge. The high-quality construction means this tool will last a long time. When working with memory wire, this tool will help you cut and trim with ease.
4.9
4.9
The BeadSmith 9-Piece Professional Plier Set
Choose Favorites List

The BeadSmith 9-Piece Professional Plier Set

$61.99

CodeTOOL-139
A great set of tools comes stocked in this convenient zipper leatherette pouch. This set is perfect for beginning beaders and professional designers alike. Keep all your tools in one place with this stylish and useful tool kit. It contains crimping pliers, nipper tools, side cutters, round nose pliers, chain nose pliers, nylon jaw pliers, knotting tweezers, split ring tweezers, and a bead scoop. The cutters in this set are recommended for use with 22 gauge wire and finer.
  • BrandBeadSmith
4.0
4.0
Lindstrom Shears
Choose Favorites List

Lindstrom Shears

$33.95

CodeTOOL-0066
Create quality and precision cuts using these Lindstrom shears. These shears will cut precisely through up to 16-gauge soft wire and 18-gauge soft sheet metal. The ergonomic cushion grip handles make it easy and comfortable to use these shears. You can use these shears to trim head pins and eye pins, cut jewelry chain and much more. These shears are intended for adult use only and you should always wear safety glasses while in use.
  • Place Of OriginUSA
  • FeaturesErgonomic
5.0
5.0
Lindstrom Supreme cutter (End, flush)
Choose Favorites List

Lindstrom Supreme cutter (End, flush)

$64.99

CodeTOOL-601
Use professional tools to create quality jewelry with the Lindstrom supreme cutter with flush end. This cutter is recognized as one of the top in the industry by jewelers and craftspeople around the world. For material, design and performance, these cutters are absolutely the best. With a precise jaw alignment, German lap-joint engineering and double leaf springs, it's even easier to create fine jewelry. The slightly angled edges at the tips of the pliers allow you to work closer with your jewelry and provide more precision. This tool is recommended for use with 16 gauge wire and finer.
  • Place Of OriginSpain
5.0
5.0
Straight Shears with Single Spring
Choose Favorites List

Straight Shears with Single Spring

$10.99

CodeTOOL-0023
Make cutting difficult pieces simpler with this pair of straight sheers. This helpful tool features a comfortable grip and sharp teeth designed to cut through metal pieces with precision so you can create new jewelry components that reflect your personal style. Use them in mixed media projects.
5.0
5.0
Black Straight Leather Cord Cutter
Choose Favorites List

Black Straight Leather Cord Cutter

$9.99

CodeTOOL-0038
Cut your leather with ease using this black straight leather cord cutter. You can use this helpful cutter to give your leather pieces clean cuts every time. It's perfect for using with Regaliz leather. Its compact size means it won't take up too much space on your work bench and you can even take it on the go. Make sure you create quality designs every time with the help of this useful tool. If you need a replacement blade, click here.
  • Place Of OriginGreece
5.0
5.0
Tronex Oval Razor Flush Cutters Semi-Relief with Ergonomic Handle
Choose Favorites List

Tronex Oval Razor Flush Cutters Semi-Relief with Ergonomic Handle

$76.99

CodeTOOL-607
Tronex oval head cutters make for an essential wire cutting tool. They are for general use. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The Razor Flush edge has no bevel on either cutting edge. The back side is absolutely flat at an angle of 45 degrees to the plane of the cutting surfaces. The exceptionally sharp edges produce cuts with virtually no raised surface on the lead (under a loupe you can see a line on the lead where the edges come together but you will not see a pinch). Also, minimum shock is imparted to the cut lead or component. However, more frequent sharpening is required with a Razor Flush cutter. The Razor Flush edge finish on Tronex cutters is executed by a proprietary process and thus unmatched by any other precision cutting tool in the world. It is also the edge finish selected for almost all specialty cutters (tip cutters and angulated cutters) made by Tronex. Recommended for use on soft wire no larger than 18 gauge.
  • Place Of OriginUSA
  • FeaturesErgonomic
5.0
5.0
Tronex Taper Razor Flush Cutters Full Relief with Ergonomic Handle
Choose Favorites List

Tronex Taper Razor Flush Cutters Full Relief with Ergonomic Handle

$79.99

CodeTOOL-609
Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. Recommended for use on soft wire no larger than 18 gauge.
  • Place Of OriginUSA
  • FeaturesErgonomic
4.3
4.3
Lindstrom Supreme Cutter Micro-Beveled Edge
Choose Favorites List

Lindstrom Supreme Cutter Micro-Beveled Edge

$55.99

CodeTOOL-600
The Lindstrom supreme cutter with micro-beveled edge is one of the finest tools in the industry, used by jewelers and craftspeople around the world. These cutters are unsurpassed in material, design, and performance. The precise jaw alignment, German lap-joint engineering, and double leaf springs are easier on your hands, so beading is a breeze. This amazing tool is recommended for use with 16 gauge wire and finer. Warning: Using this tool to cut stainless steel wire can damage the tool.
  • Place Of OriginSpain
5.0
5.0
The Beadsmith Zebra Tool Kit
Choose Favorites List

The Beadsmith Zebra Tool Kit

$29.87

CodeTOOL-0268
You'll always know which tools are yours with this kit from The Beadsmith. This kit comes in a pouch that displays a fun zebra print pattern and all the tools inside feature the same pattern on their handles. The set includes a side cutter, round nose pliers, chain nose pliers, a bead reamer with three different tips that can be stored inside the hollow handle, flat nose pliers, and knotting tweezers. Even the tweezers display the black and white stripes! All of the pliers feature slip-resistant matte finish grips, a polished steel head, double-leaf spring for comfort, and boxjoint construction. You'll love working with these tools, whether you are a beginner or an experienced beader.
  • BrandBeadSmith
0.0
0.0
The BeadSmith 4-Piece Plier Set - Purple
Choose Favorites List

The BeadSmith 4-Piece Plier Set - Purple

$28.99

CodeTOOL-140
Perfect for beginning beaders, this leatherette zipper pouch will hold the basic tools you need to get started in your beading hobby or profession. The set comes with chain nose pliers, round nose pliers, flat nose pliers, and a side cutter. These tools have polished steel heads and double leaf springs for smooth operation. The cutters in this set are recommended for use with 22 gauge wire and finer.
  • BrandBeadSmith
4.0
4.0
Tronex Taper Flush Cutters Full Relief with Ergonomic Handle
Choose Favorites List

Tronex Taper Flush Cutters Full Relief with Ergonomic Handle

$69.99

CodeTOOL-608
Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The flush cutting edge means that both cutting edges receive a tiny bevel by diamond honing over the entire outer length. The bevels are at 60 degrees to the plane of the cutting surface. They are no more than 0.12mm in width and thus form an exceptionally small V-shaped groove along the edges. It also yields only the tiniest raised surface, or pinch, on the cut lead. Recommended for use on soft wire no larger than 16 gauge.
  • Place Of OriginUSA
  • FeaturesErgonomic
4.7
4.7
Heavy Duty Cutter
Choose Favorites List

Heavy Duty Cutter

$13.99

CodeTOOL-512
This heavy duty cutter is extremely strong. Use this tool for heavy gauge wires, bulk chains, and more. This cutter combines comfortable grip coating and extra fine tips to ensure precision cuts every time. As a safety precaution, the pliers have a locking mechanism to keep them closed while not in use. This apparatus has a good amount of counter pressure to ensure that they will not come undone on their own. As with all cutters, use them with caution and always point them away from yourself.
4.4
4.4
Micro Snips
Choose Favorites List

Micro Snips

$3.69

CodeTOOL-111
Micro Snips are sharp, compact, and easy to use. These snips work well for cutting Beadalon or Griffin Thread, Elasticity, SuppleMax, Leather, and other soft cords. They are perfect for travel thanks to their small design. Keep this tool among your supplies and be prepared for cutting with precision and ease.
5.0
5.0
Curved Blade Scissors
Choose Favorites List

Curved Blade Scissors

$4.29

CodeTOOL-122
These scissors have very sharp 1-inch blades to cut thread, ribbon, and more. The fine, curved points allow access to tight areas. They're great for cutting threads in bead weaving and embroidery projects. The total length of these scissors is 3.5 inches. Made of stainless steel, these durable scissors will stand the test of time. Add these craft essentials to your collection and be prepared for all kinds of projects.
3.0
3.0
Artbeads Jewelry Making Tools Starter Set
Choose Favorites List

Artbeads Jewelry Making Tools Starter Set

$49.99

Code000-TOOLSET001
If you're a beginner to jewelry-making, you're going to need the right tools. Our Artbeads Jewelry Making Tools Starter Set will ensure you're prepared for lots of projects. This exclusive set includes basic tools every beader needs, such as a bead crimper, side cutters, chain nose pliers and round nose pliers. Jewelry wire is also included. All of these tools are held together in a collectible and reusable drawstring pouch, along with a postcard featuring an exclusive link to a webpage full of instructions, tips and other fun stuff to help get you started. Leave the guesswork out of jewelry-making and let this Artbeads Starter Set provide you with nearly everything you need.
  • BrandArtbeads
  • Place Of OriginUSA
5.0
5.0
German End Cutter Semi Flush
Choose Favorites List

German End Cutter Semi Flush

$31.99

CodeTOOL-509
Trim as close as possible to your work with these wonderful semi-flush end cutters. These end cutters are ideal for trimming head pins, eye pins, and more. The unique shape allows you to get close and into tight spaces. This tool is recommended for use with 20 gauge wire and finer. You'll want to add this essential jewelry-making tool to your collection.
  • Place Of OriginGermany
0.0
0.0
German Side Cutter
Choose Favorites List

German Side Cutter

$26.99

CodeTOOL-503
This side cutter features a semi-flush regular jaw. The fine, slim head allows cutters to reach tight spaces, so it's perfect for jewelry making. Use these cutters to trim head pins, eye pins, and other craft wire. This high-quality tool will become an essential in your beading box. They are easy to use and will come in handy in many different projects.
  • Place Of OriginGermany
3.0
3.0
Blade for Black Plastic Straight Leather Cord Cutter
Choose Favorites List

Blade for Black Plastic Straight Leather Cord Cutter

$2.49

CodeSUP-0104
This blade for the black plastic straight leather cord cutter (TOOL-0038) features sharp edges that will give your leather cord a clean cut every time. Stock up on this replacement blade so you never have to worry about frayed edges. You'll love how easy it is to cut lengths of leather for your projects with this helpful tool.
  • Place Of OriginGreece
0.0
0.0
The BeadSmith 4-Piece Color ID Plier Set
Choose Favorites List

The BeadSmith 4-Piece Color ID Plier Set

$28.99

CodeTOOL-142
This leatherette zipper pouch holds round nose pliers, chain nose pliers, flat nose pliers and side cutters, all with different colored handles. Whether you are learning the tools for the first time, conducting classes, or are a busy business owner, these tools will be easy to identify, grab, and use. The cutters in this set are recommended for use with 22 gauge wire and finer.
  • BrandBeadSmith
4.3
4.3
Beader's Mini Tool Travel Kit
Choose Favorites List

Beader's Mini Tool Travel Kit

$16.99

CodeTOOL-618
Design jewelry on the go with this useful beader's mini tool travel kit. This helpful kit contains all of the tools you need to create stunning jewelry wherever you are and includes the following: round nose pliers, a semi-flush side cutter, chain nose pliers with cutter, a mini bead board, a thread cutter, and #5 knotting tweezers. All of these tools fit conveniently into a travel-sized box so you can easily pack them to bring with you anywhere.
  • BrandBeadSmith
0.0
0.0
German Ergonomic Side cutters
Choose Favorites List

German Ergonomic Side cutters

$32.99

CodeTOOL-507
This regular-jaw, semi-flush cutter is made in Germany with the finest tool steel and is beautifully polished with box-joint construction and double leaf springs. The 4 3/4-inch ergonomic handles are designed for repetitive use. With a handle width of 3/4 inch and a soft non-slip texture, the user is assured of less fatigue. The handle contact is 300% greater than with conventional handles. Try this wonderful tool for more comfort as you work. This tool is recommended for use with 20 gauge wire and finer.
  • Place Of OriginGermany
  • FeaturesErgonomic
5.0
5.0
Large Loop Scissors
Choose Favorites List

Large Loop Scissors

$5.29

CodeTOOL-123
Ever try to get your fingers through most small scissors? Here's an improvement you'll appreciate - larger loops. These scissors make cutting easier with precision and comfort. It's a great option for cutting bead cord, thread, and other light cutting jobs. These scissors feature gold colored handles and a straight blade with the overall length of 4-inches. It is made of stainless steel, so it's a durable option for your collection of tools.
4.7
4.7
Side Cutters - Semi Flush
Choose Favorites List

Side Cutters - Semi Flush

$10.99

CodeTOOL-131
These high-quality and sturdy side cutters are an essential for every beader. Use this tool for all of your wire working. They allow you to easily trim and cut off any excess wire. The shape of the blades also allow you to trim easier in tight spaces, for precision work you can be proud of. These side-cutters are recommended for 20 gauge wire and finer.
3.6
3.6
sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View