Duration: 18 ms, Number of Items: 7

sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View
Tronex Flat-Nose Pliers Smooth Jaw with Ergonomic Handle
Choose Favorites List

Tronex Flat-Nose Pliers Smooth Jaw with Ergonomic Handle

$54.99

CodeTOOL-611
These Tronex flat nose pliers are commonly used in fine jewelry and beading work. Tronex flat nose pliers features a very fine tip and smooth jaws. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
4.7
4.7
Tronex Taper Flush Cutters Full Relief with Ergonomic Handle
Choose Favorites List

Tronex Taper Flush Cutters Full Relief with Ergonomic Handle

$69.99

CodeTOOL-608
Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The flush cutting edge means that both cutting edges receive a tiny bevel by diamond honing over the entire outer length. The bevels are at 60 degrees to the plane of the cutting surface. They are no more than 0.12mm in width and thus form an exceptionally small V-shaped groove along the edges. It also yields only the tiniest raised surface, or pinch, on the cut lead. Recommended for use on soft wire no larger than 16 gauge.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
4.7
4.7
Tronex Oval Razor Flush Cutters Semi-Relief with Ergonomic Handle
Choose Favorites List

Tronex Oval Razor Flush Cutters Semi-Relief with Ergonomic Handle

$76.99

CodeTOOL-607
Tronex oval head cutters make for an essential wire cutting tool. They are for general use. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The Razor Flush edge has no bevel on either cutting edge. The back side is absolutely flat at an angle of 45 degrees to the plane of the cutting surfaces. The exceptionally sharp edges produce cuts with virtually no raised surface on the lead (under a loupe you can see a line on the lead where the edges come together but you will not see a pinch). Also, minimum shock is imparted to the cut lead or component. However, more frequent sharpening is required with a Razor Flush cutter. The Razor Flush edge finish on Tronex cutters is executed by a proprietary process and thus unmatched by any other precision cutting tool in the world. It is also the edge finish selected for almost all specialty cutters (tip cutters and angulated cutters) made by Tronex. Recommended for use on soft wire no larger than 18 gauge.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
5.0
5.0
Tronex Oval Flush Cutters Semi-Relief with Ergonomic Handle
Choose Favorites List

Tronex Oval Flush Cutters Semi-Relief with Ergonomic Handle

$69.99

CodeTOOL-606
Tronex oval head cutters are great for general use. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. The flush cutting edge means that both cutting edges receive a tiny bevel by diamond honing over the entire outer length. The bevels are at 60 degrees to the plane of the cutting surface. They are no more than 0.12mm in width and thus form an exceptionally small V-shaped groove along the edges. It also yields only the tinniest raised surface, or pinch, on the cut lead. Recommended for use on soft wire no larger than 16 gauge.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
3.0
3.0
Tronex Taper Razor Flush Cutters Full Relief with Ergonomic Handle
Choose Favorites List

Tronex Taper Razor Flush Cutters Full Relief with Ergonomic Handle

$79.99

CodeTOOL-609
Taper head cutters are very popular. The pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity. Get into those small coils and trim away the sharp edges when you are doing wire work that will be worn next to the skin. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue. Recommended for use on soft wire no larger than 18 gauge.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
4.3
4.3
Tronex Chain-Nose Pliers Smooth Jaws with Ergonomic Handle
Choose Favorites List

Tronex Chain-Nose Pliers Smooth Jaws with Ergonomic Handle

$56.99

CodeTOOL-613
Chain nose pliers are commonly used in fine jewelry and beading work. Tronex chain nose pliers feature a very fine tip (.060-inch x .050-inch), and extended gripping power. Tronex chain nose pliers come with smooth inner jaws to help prevent marring the wire. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
5.0
5.0
Tronex Round Nose Pliers with Ergonomic Handle
Choose Favorites List

Tronex Round Nose Pliers with Ergonomic Handle

$56.99

CodeTOOL-612
These Tronex round nose pliers are a versatile and comfortable tool that you can use to clamp and to form loops on wire. They feature very fine tips and have a jaw formed by two large, perfectly machined cones. Each of the two tips is .030 inch in diameter. The very long jaw of the Tronex round nose pliers, 1.3 inch, allows for an increased range of loop diameters to be formed, from .030 inch to .250 inch. The longer jaw can also provide increased access when you are doing detailed work. The ergonomic handles are 4.8 inches, fitting the average hand much better than the smaller tools on the market and allowing for easier repetitive use without fatigue.
  • BrandTronex
  • Place Of OriginUSA
  • FeaturesErgonomic
4.9
4.9
sort: relevance   rating   a-z   z-a   $ low-high   $ high-low   
View