Posted By: karl
no cureMarch 26, 2015
product will not harden,after ten days the leftover glue in my mixing cup was still soft and tacky. l use many different adhesives for my projects from plastic ,cold steel weld apoxies to super glues.this product is not for me.i would never trust this product setting a precious stone or for anything else for that matter
5 people found this review helpful
Posted By: Lirene
HmmmmDecember 19, 2011
Posted By: Maxie
Epoxy - poor performanceDecember 7, 2009
So far, not pleased with this product.
1. No instruction sheet included; can figure out use but don't understand why it is not provided from the manufacturer.
2. Unless my first use of the plunger dispensed an unequal ratio, this never seemed to fully cure, even after MORE than 24 hours; residual epoxy on my project (around crystals) still seems gummy. However, I will give it one more try, but probably just for repair, and not a new project.
3. Personally prefer a crystal-clear drying epoxy; this is amber.
4. Placed the syringe on my work table, with covered cut ends facing up, and have just found it slowly leaking down from the underside on to my table--poor construction of syringe housing.
17 people found this review helpful
Posted By: Maricela R.
Works GreatFebruary 19, 2008
Although this product takes time to dry, it dries beautifully. Give it 24 hrs. You really need to be patient but be sure that after you mix the two parts and apply it ,it will dry nice and clear. I also like that it doesn't dry immediately to give you time to arrange your rhinestones and it's not bulky The glue's thin layer leaves a nice and even look.
7 people found this review helpful
Posted By: Vikki R.
2-part epoxy, doesn't workMarch 20, 2007
Click here to review this product
(Reviews are subject to approval)