The polyester chain used in this necklace is a great alternative to metal chain. It is light weight and combined with the pearls and beads, hangs beautifully. We used the black chain in our piece; however it comes in a variety of other colors for endless possibilities.
For this necklace you will make sections or components and then connect them together. The components from step one will be connected with the simple loop you make on the head pin. All the other components will be connected using crimp tubes. For help using crimp tubes please see our Handy Tips section
Step one: On a 2-inch copper head pin string one 5mm Swarovski copper pearl, one 4mm Swarovski black pearl, one 10 mm Swarovski gold pearl, then reverse the pattern.
Finish with a simple loop. For help making a simple loop please see the Handy Tips section. Make another component and set both aside.
Step two: Clamp a bead stopper to one end of a 6 inch piece of soft flex .014 clear jewelry wire. String one 2x2mm gold-filled crimp tube, one 4mm Swarovski black pearl, one 5mm Swarovski copper pearl, one 11x9 mm matte jet w/Picasso oval, one 6mm Swarovski black pearl, one 10mm Swarovski gold pearl, one 6mm Swarovski black pearl and one 11x9mm matte jet w/Picasso oval, then reverse the pattern. Clamp with a bead stopper. Make another component and set both aside.
Step three: Clamp a bead stopper to one end of a 4 ½ inch piece of soft flex. String one 2x2mm gold filled crimp tube, one 4mm Swarovski black pearl, one 5mm Swarovski copper pearl, one 11x9mm matte jet w/Picasso oval, one 6mm Swarovski black pearl and one 10mm Swarovski gold pearl, then reverse the pattern. Clamp with a bead stopper. Make another component and set aside.
Step four: Cut the black polyester chain as follows: two 3 ½ sections and two 6 inch sections, leaving approximately one 11 inch section. Connect together in this order: One component from step one, one 6 inch piece of black polyester chain, one component from step two, one 3 ½ in piece of black polyester chain, one component from step three, one 11 inch piece of black polyester chain. Reverse the pattern as you work toward the other end of the necklace.
Step five: Attach crimp covers over the crimp tubes. For help using crimp covers please see our Handy Tips section.
Approximate length: 46 inches Approximate cost: Under $45.00 Estimated time: Less than 2 hours Difficulty level: Beginner
List of Components:
5810 10mm Swarovski pearl gold (5810-GOLD10, qty 8)
5810 5mm Swarovski pearl copper (5810-COP5, qty 12)
11x9mm matte jet w/ Picasso oval (CR-OV006, qty 10)
5810 6mm Swarovski pearl black (5810-BLK6, qty. 12)
5810 4mm Swarovski pearl black (5810-BLK4, qty. 12)
Black 2.5 foot polyester chain (POLYCH-01, qty 1)
14K/20 gold-filled 2x2mm crimp tube (GF-CRM2, qty 8)
3.2mm gold-filled crimp cover (GF-CCOV01, qty 8)
2-inch 21 gauge copper head pin (C-0028, qty 2)
Soft Flex .014 fine 30FT clear (Silver Satin) (SF14-30CL, qty 1)
Bead Stopper - 6-piece pack (BEADSTPR, qty 2)
Tools used:
Nipper tool (TOOL-101)
Crimp tool (TOOL-100)
Ergonomic Chain Nose Pliers (TOOL-125)
Ergonomic Round Nose Pliers (TOOL-127)
